Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black standalone SATA duplicator with five hot-swap drive slots

Systor

Systor 1:5 SATA Hard Drive Duplicator & Sanitizer (SYS105HS-DP)

SKU CH-NPQ3-R5028

Standalone SATA duplicator copies or erases up to five 2.5 or 3.5 drives at 90 MB/s with 128 MB buffer and DoD 5220.22-M sanitisation

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Data Transfer RateUp to 90MB/s (Depending on HDD speed)
  • Language SupportEnglish / Spanish / French / Japanese
  • Operating TypeStandalone
  • ConnectorSATA

TARGET SIZE 1 to 05

DATA TRANSFER RATE 5.4GB/min [90MB/sec]

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

Standalone SATA duplicator & sanitizer

The Systor 1:5 unit copies one source drive to five targets at once without a host PC. It handles both 2.5 and 3.5 SATA disks, including SSDs and HDDs, and runs sector-by-sector duplication plus multi-pass DoD 5220.22-M sanitisation. Menus are available in English, Spanish, French and Japanese.

Transfer ceiling at 90 MB/s

Real-world speed depends on the slowest drive in the chain, topping out at 90 MB/s and 5.4 GB per minute. The 128 MB buffer smooths bursts, but sustained throughput cannot exceed the SATA link or the media itself. Hot-swap bays let you swap targets without powering down the chassis.

Five targets per run

One operation clones or erases up to five drives, giving IT teams and forensic labs enough parallelism for small batches. Larger deployments need multiple passes or additional duplicators, and the standalone design means no software licences or host resources are consumed.

Kohokohdat

  • Standalone operation copies drives without a host PC
  • 1-to-5 target ports duplicate up to five drives simultaneously
  • Up to 90 MB/s transfer rate moves data quickly
  • DoD 5220.22-M compliant erase sanitises drives securely
  • 128 MB buffer memory sustains steady copy performance

Tekniset tiedot

BrandSystor
TypeHard Drive Duplicator
Target1 to 5
Data Transfer RateUp to 90MB/s (Depending on HDD speed)
Language SupportEnglish / Spanish / French / Japanese
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
Package Contentssee pictures for details

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 1-to-5 target model or a different capacity?

This unit copies from one source to up to five targets at once, handling both 2.5 and 3.5 inch SATA drives in the same session.

What does the 90 MB/s transfer rate mean when I am actually cloning drives?

The duplicator can move data at up to 90 MB per second, limited by the speed of the slowest drive installed.

How does the SATA interface limit the erase and copy performance?

SATA connectivity caps throughput at the drive's native SATA speed, so the 90 MB/s peak and DoD 5220.22-M erase run at whatever rate each attached drive supports.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.