Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Black standalone SATA duplicator with LCD screen and three hot-swap drive slots

Systor

Systor 1:3 SATA Duplicator & Sanitizer 9GB/min 150MB/s 128MB 250W SYS203HS-DP

SKU CH-GKP5-AJT8X

A standalone duplicator and sanitizer that copies three SATA drives at 150 MB/s and meets DoD 5220.22-M erasure standards

  • TypeHard Drive Duplicator
  • Target1 to 3
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 03

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Copies up to three drives at once
  • 150 MB/s transfer rate for fast duplication
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • Standalone operation with LCD screen, no computer needed
  • Hot-swap bays accept 2.5" and 3.5" drives without adapters

Standalone SATA Duplicator 1:3

The Systor SYS203HS-DP copies one source drive to three targets without a host computer. It accepts 2.5 and 3.5 inch SATA drives directly in hot-swap slots. An LCD screen shows progress and status during standalone operation.

DoD-Compliant Erase and Copy Modes

Two copy modes let you duplicate only system and files or the entire media sector by sector. Sanitisation follows the DoD 5220.22-M standard with multiple-pass overwrite. No software installation is required for any function.

150 MB/s Throughput with 128 MB Buffer

The unit sustains up to 150 MB per second (9.0 GB per minute) across all three target ports. A 128 MB buffer smooths burst transfers during simultaneous cloning. Drives larger than the buffer capacity are handled in streaming passes; very high-capacity arrays will take proportionally longer.

Høydepunkter

  • Copies up to three drives at once
  • 150 MB/s transfer rate for fast duplication
  • DoD 5220.22-M compliant sanitisation for secure erasure
  • Standalone operation with LCD screen, no computer needed
  • Hot-swap bays accept 2.5" and 3.5" drives without adapters

Spesifikasjoner

BrandSystor
Model662712130972
TypeHard Drive Duplicator
Target1 to 3
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 250 W
Package Contentssee pictures for details

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the 40 mm rear fans and per-bay outtake fans need cleaning or replacement after extended use?

The unit uses 40 mm rear fans and a dedicated outtake fan on each drive bay to maintain airflow; dust buildup on these fans is the primary maintenance item, and they can be replaced with standard 40 mm fans if they become noisy or fail.

What limits continuous operation when copying at the full 150 MB/s rate across three targets?

The 128 MB buffer and the 250 W power supply set the practical ceiling; sustained maximum throughput across all three SATA ports is constrained by buffer capacity and the power budget for three drives plus the duplicator electronics.

How much heat and noise should I expect when the duplicator runs all day at 9.0 GB/min?

Dual 40 mm rear fans and per-bay outtake fans move air continuously; the 250 W supply (115/230 V, 50/60 Hz) powers the duplicator and up to three drives, so heat output and fan noise scale with the number of populated bays and ambient temperature.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.