暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black standalone SATA duplicator with eleven hot-swap drive slots and LCD screen

Systor

Systor 1 to 11 SATA Duplicator 150MB/S 128MB SYS2011HS-DP

SKU CH-649Z-0HMN7

Standalone SATA duplicator copies or sanitises up to 11 drives at 150 MB/s with 128 MB buffer and DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 11
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 11

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Duplicates up to 11 drives simultaneously with a single button press
  • Achieves 150 MB/s transfer speed for rapid cloning and sanitisation
  • Operates standalone with no computer or software required
  • Supports both 2.5" and 3.5" SATA drives without adapters
  • Includes DoD 5220.22-M compliant multi-pass erase for secure data removal

Standalone SATA Duplicator with 11 Targets

The Systor SYS2011HS-DP is a standalone hard-drive duplicator and sanitiser that copies one SATA source to up to 11 targets simultaneously. It handles both 2.5 and 3.5 inch HDDs and SSDs without adapters and requires no host computer or software to operate.

For IT Teams Needing Batch Cloning and Sanitisation

Suited for environments that need to duplicate operating-system images or erase drives to DoD 5220.22-M standard in a single workflow. Not for users who need to duplicate more than 11 drives at once or who require a computer-connected solution with software control.

150 MB/s SATA Copy Speed and 128 MB Buffer

The unit sustains up to 150 MB per second (9.0 GB per minute) per port with a 128 MB buffer, letting large drives finish quickly while the LCD screen reports progress for each bay.

特長

  • Duplicates up to 11 drives simultaneously with a single button press
  • Achieves 150 MB/s transfer speed for rapid cloning and sanitisation
  • Operates standalone with no computer or software required
  • Supports both 2.5" and 3.5" SATA drives without adapters
  • Includes DoD 5220.22-M compliant multi-pass erase for secure data removal

仕様

BrandSystor
Model662712130385
TypeHard Drive Duplicator
Target1 to 11
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 400 W
Package Contentssee pictures for details

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 1-to-11 target model or a smaller duplicator?

The SYS2011HS-DP supports 1 to 11 targets, so you can clone one source to up to eleven drives at once; pick it if you need that maximum throughput.

What does the 150 MB/s headline speed mean when the duplicator is running?

The 150 MB/s (9.0 GB/min) rating is the peak transfer rate per port; actual copy time depends on the source drive's sustained read speed and the selected copy mode.

The unit uses SATA — what does that cap in practice?

SATA limits each bay to the SATA interface's maximum bandwidth, so the 150 MB/s figure is the practical ceiling for any connected 2.5" or 3.5" drive.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。