Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black standalone SATA duplicator with seven drive slots and LCD screen

Systor

Systor SYS207HS-DP 1:7 SATA Duplicator & Sanitizer 9.0GB/min 150MB/sec 128MB buffer 300W

SKU CH-G9W1-Y494N

Standalone SATA duplicator copies or sanitises up to seven 2.5 or 3.5 drives at 150 MB/s with 128 MB buffer and DoD 5220.22-M erase

  • TypeHard Drive Duplicator
  • Target1 to 7
  • Buffer Memory128 MB
  • Data Transfer Rate9.0GB/min (150MB/sec)
  • DisplayLCD Screen
  • Operating TypeStandalone

TARGET SIZE 1 to 07

DATA TRANSFER RATE 9.0GB/min [150MB/sec]

  • Standalone operation with no computer required
  • 150 MB/sec copy speed across seven targets
  • 128 MB buffer sustains high-throughput duplication
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Hot-swap bays accept 2.5 and 3.5 inch drives without adapters

Systor 1:7 SATA duplicator for bulk cloning

The Systor SYS207HS-DP is a standalone hard-drive duplicator that copies one source SATA drive to up to seven targets at once. It accepts both 2.5 and 3.5 inch HDDs or SSDs without adapters and operates without a host computer. An LCD screen shows progress and status for each bay. The unit delivers a sustained 150 MB/sec transfer rate for fast, simultaneous duplication.

Check SATA drives and power before ordering

Verify that every source and target drive uses a standard SATA interface; other interfaces are not supported. The duplicator runs on 115 or 230 V AC at 50 or 60 Hz and includes a 300 W internal power supply. Hot-swap bays allow drives to be inserted or removed while the unit is powered on. No software installation or host system is required for operation.

Replaces manual single-drive copying

This duplicator upgrades from one-to-one cloning tools by writing to seven targets in parallel, cutting total project time for IT refresh, forensic imaging or mass deployment. It also supersedes simple wipe utilities with DoD 5220.22-M compliant multi-pass sanitisation built into the same standalone chassis. The jump is worth it when you regularly duplicate or sanitise multiple SATA drives per session.

Priekšrocības

  • Standalone operation with no computer required
  • 150 MB/sec copy speed across seven targets
  • 128 MB buffer sustains high-throughput duplication
  • DoD 5220.22-M compliant sanitisation erases data securely
  • Hot-swap bays accept 2.5 and 3.5 inch drives without adapters

Specifikācijas

BrandSystor
ModelSYS207HS-DP
TypeHard Drive Duplicator
Target1 to 7
Buffer Memory128 MB
Data Transfer Rate9.0GB/min (150MB/sec)
DisplayLCD Screen
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Load TypeSlot
FeaturesMULTIPLE COPY FUNCTIONS
System and Files:
Copies only the system and files area of the source HDD, saving overall copy time
Whole Media:
Copies the entire content on the source HDD device, including both the data and empty spaces
Copy + Compare:
Ensures an accurate duplication between the source HDD and target HDD(s)
MULTIPLE ERASE FUNCTIONS
Quick Erase:
Only erases the table of content/index of the target HDD's file system
Full Erase:
Erases the entire content and whole sectors of the target HDD
DoD Erase:
Compliant with U.S.A. Department of Defense standard, this option fully erase
Power Supply115/230 V, 50/60 Hz, 300 W
Package Contentssee pictures for details

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What comes in the box with the SYS207HS-DP duplicator?

The supplier states to see the product pictures for the exact package contents. The unit includes a 300 W power supply that operates on 115/230 V at 50/60 Hz and built-in cooling fans for each drive bay.

Should I choose the Systems and Files or Whole HDD copy mode?

Choose Systems and Files to copy only the data area and save time. Choose Whole HDD for a sector-by-sector clone that includes partitions and boot sectors.

What does the 9.0 GB/min transfer rate mean when the duplicator is running?

It indicates a maximum copy speed of 150 MB/sec across the SATA interface, limited by the source and target drive performance and the 128 MB buffer.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.