NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
Thermaltake
Mid-tower chassis with tempered glass panels, wood trim, three pre-installed 120 mm ARGB fans and room for a 360 mm radiator
The Thermaltake View 270 Plus WS ARGB is a mid tower chassis that supports E-ATX, ATX, mATX and mITX motherboards. It uses a combination of mesh and tempered glass on the front and left panels to show components while allowing airflow. Three 120mm ARGB Lite fans come pre-installed with two on the side for intake and one at the rear for exhaust. The case weighs 15 and measures 17.9 x 9 x 18 inch.
A redesigned bottom chamber is wrapped with four squared strips of wood for a visual accent that matches a wood-themed setup. The three pre-installed hydraulic bearing 120mm ARGB Lite fans provide illuminated intake and exhaust. Their RGB lighting can be controlled through motherboard software from ASUS, GIGABYTE, MSI and ASRock. Up to nine 120mm fans can be fitted in total for expanded cooling.
The mid tower footprint keeps the build compact while fitting the listed hardware. A 360mm radiator can be mounted on the top and the case accepts air coolers up to 180mm in height. Graphics cards up to 420mm in length and power supplies up to 220mm in length are supported. Builders needing longer GPUs, larger radiators or additional drive bays beyond the standard layout will find the chassis restrictive.
| Brand | Thermaltake |
|---|---|
| Series | Thermaltake View 270 Plus WS ARGB |
| Model | CA-1Y7-00M1WN-WS |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | Sporting a combination of mesh and tempered glass |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Fan Options | 3x120mm ARGB Lite Fans |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | 360mm Radiator Support |
| 120mm Fans | 9 |
| Max GPU Length | 420mm GPU Clearance |
| Max PSU Length | 220mm PSU Clearance |
| Dimensions | 17.9 x 9 x 18 inch |
| Weight | 15 |
| Težina pošiljke | 7.98 kg |
| Dimenzije pakiranja | 521 × 516 × 290 mm |
The three hydraulic-bearing 120 mm ARGB Lite fans are pre-installed at the side and rear; clean dust from their frames and filters every few months and replace only if bearing noise or vibration appears.
The top-mounted 360 mm radiator exhausts heat directly upward, so coolant temperature rise — not chassis airflow — becomes the first bottleneck during prolonged heavy loads.
With up to nine 120 mm fans the mesh-and-glass layout moves large air volumes; noise scales with fan speed curves, while the open top and side vents keep internal temperatures close to ambient.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?