EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Thermaltake
Mid-tower chassis with tempered glass panels, wood trim, three pre-installed 120 mm ARGB fans and room for a 360 mm radiator
The Thermaltake View 270 Plus WS ARGB is a mid tower chassis that supports E-ATX, ATX, mATX and mITX motherboards. It uses a combination of mesh and tempered glass on the front and left panels to show components while allowing airflow. Three 120mm ARGB Lite fans come pre-installed with two on the side for intake and one at the rear for exhaust. The case weighs 15 and measures 17.9 x 9 x 18 inch.
A redesigned bottom chamber is wrapped with four squared strips of wood for a visual accent that matches a wood-themed setup. The three pre-installed hydraulic bearing 120mm ARGB Lite fans provide illuminated intake and exhaust. Their RGB lighting can be controlled through motherboard software from ASUS, GIGABYTE, MSI and ASRock. Up to nine 120mm fans can be fitted in total for expanded cooling.
The mid tower footprint keeps the build compact while fitting the listed hardware. A 360mm radiator can be mounted on the top and the case accepts air coolers up to 180mm in height. Graphics cards up to 420mm in length and power supplies up to 220mm in length are supported. Builders needing longer GPUs, larger radiators or additional drive bays beyond the standard layout will find the chassis restrictive.
| Brand | Thermaltake |
|---|---|
| Series | Thermaltake View 270 Plus WS ARGB |
| Model | CA-1Y7-00M1WN-WS |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | Sporting a combination of mesh and tempered glass |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Fan Options | 3x120mm ARGB Lite Fans |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | 360mm Radiator Support |
| 120mm Fans | 9 |
| Max GPU Length | 420mm GPU Clearance |
| Max PSU Length | 220mm PSU Clearance |
| Dimensions | 17.9 x 9 x 18 inch |
| Weight | 15 |
| Peso de envío | 7.98 kg |
| Dimensiones del paquete | 521 × 516 × 290 mm |
The three hydraulic-bearing 120 mm ARGB Lite fans are pre-installed at the side and rear; clean dust from their frames and filters every few months and replace only if bearing noise or vibration appears.
The top-mounted 360 mm radiator exhausts heat directly upward, so coolant temperature rise — not chassis airflow — becomes the first bottleneck during prolonged heavy loads.
With up to nine 120 mm fans the mesh-and-glass layout moves large air volumes; noise scales with fan speed curves, while the open top and side vents keep internal temperatures close to ambient.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?