NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Thermaltake
Mid-tower chassis with tempered glass panels, wood trim, three pre-installed 120 mm ARGB fans and room for a 360 mm radiator
The Thermaltake View 270 Plus WS ARGB is a mid tower chassis that supports E-ATX, ATX, mATX and mITX motherboards. It uses a combination of mesh and tempered glass on the front and left panels to show components while allowing airflow. Three 120mm ARGB Lite fans come pre-installed with two on the side for intake and one at the rear for exhaust. The case weighs 15 and measures 17.9 x 9 x 18 inch.
A redesigned bottom chamber is wrapped with four squared strips of wood for a visual accent that matches a wood-themed setup. The three pre-installed hydraulic bearing 120mm ARGB Lite fans provide illuminated intake and exhaust. Their RGB lighting can be controlled through motherboard software from ASUS, GIGABYTE, MSI and ASRock. Up to nine 120mm fans can be fitted in total for expanded cooling.
The mid tower footprint keeps the build compact while fitting the listed hardware. A 360mm radiator can be mounted on the top and the case accepts air coolers up to 180mm in height. Graphics cards up to 420mm in length and power supplies up to 220mm in length are supported. Builders needing longer GPUs, larger radiators or additional drive bays beyond the standard layout will find the chassis restrictive.
| Brand | Thermaltake |
|---|---|
| Series | Thermaltake View 270 Plus WS ARGB |
| Model | CA-1Y7-00M1WN-WS |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | Sporting a combination of mesh and tempered glass |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Fan Options | 3x120mm ARGB Lite Fans |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | 360mm Radiator Support |
| 120mm Fans | 9 |
| Max GPU Length | 420mm GPU Clearance |
| Max PSU Length | 220mm PSU Clearance |
| Dimensions | 17.9 x 9 x 18 inch |
| Weight | 15 |
| Sendingarþyngd | 7.98 kg |
| Stærð sendingar | 521 × 516 × 290 mm |
The three hydraulic-bearing 120 mm ARGB Lite fans are pre-installed at the side and rear; clean dust from their frames and filters every few months and replace only if bearing noise or vibration appears.
The top-mounted 360 mm radiator exhausts heat directly upward, so coolant temperature rise — not chassis airflow — becomes the first bottleneck during prolonged heavy loads.
With up to nine 120 mm fans the mesh-and-glass layout moves large air volumes; noise scales with fan speed curves, while the open top and side vents keep internal temperatures close to ambient.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?