NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Thermaltake
Mid-tower chassis with tempered glass panels, wood trim, three pre-installed 120 mm ARGB fans and room for a 360 mm radiator
The Thermaltake View 270 Plus WS ARGB is a mid tower chassis that supports E-ATX, ATX, mATX and mITX motherboards. It uses a combination of mesh and tempered glass on the front and left panels to show components while allowing airflow. Three 120mm ARGB Lite fans come pre-installed with two on the side for intake and one at the rear for exhaust. The case weighs 15 and measures 17.9 x 9 x 18 inch.
A redesigned bottom chamber is wrapped with four squared strips of wood for a visual accent that matches a wood-themed setup. The three pre-installed hydraulic bearing 120mm ARGB Lite fans provide illuminated intake and exhaust. Their RGB lighting can be controlled through motherboard software from ASUS, GIGABYTE, MSI and ASRock. Up to nine 120mm fans can be fitted in total for expanded cooling.
The mid tower footprint keeps the build compact while fitting the listed hardware. A 360mm radiator can be mounted on the top and the case accepts air coolers up to 180mm in height. Graphics cards up to 420mm in length and power supplies up to 220mm in length are supported. Builders needing longer GPUs, larger radiators or additional drive bays beyond the standard layout will find the chassis restrictive.
| Brand | Thermaltake |
|---|---|
| Series | Thermaltake View 270 Plus WS ARGB |
| Model | CA-1Y7-00M1WN-WS |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | Sporting a combination of mesh and tempered glass |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Fan Options | 3x120mm ARGB Lite Fans |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | 360mm Radiator Support |
| 120mm Fans | 9 |
| Max GPU Length | 420mm GPU Clearance |
| Max PSU Length | 220mm PSU Clearance |
| Dimensions | 17.9 x 9 x 18 inch |
| Weight | 15 |
| Přepravní hmotnost | 7.98 kg |
| Rozměry balení | 521 × 516 × 290 mm |
The three hydraulic-bearing 120 mm ARGB Lite fans are pre-installed at the side and rear; clean dust from their frames and filters every few months and replace only if bearing noise or vibration appears.
The top-mounted 360 mm radiator exhausts heat directly upward, so coolant temperature rise — not chassis airflow — becomes the first bottleneck during prolonged heavy loads.
With up to nine 120 mm fans the mesh-and-glass layout moves large air volumes; noise scales with fan speed curves, while the open top and side vents keep internal temperatures close to ambient.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?