NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Thermaltake
Mid-tower chassis with tempered glass panels, wood trim, three pre-installed 120 mm ARGB fans and room for a 360 mm radiator
The Thermaltake View 270 Plus WS ARGB is a mid tower chassis that supports E-ATX, ATX, mATX and mITX motherboards. It uses a combination of mesh and tempered glass on the front and left panels to show components while allowing airflow. Three 120mm ARGB Lite fans come pre-installed with two on the side for intake and one at the rear for exhaust. The case weighs 15 and measures 17.9 x 9 x 18 inch.
A redesigned bottom chamber is wrapped with four squared strips of wood for a visual accent that matches a wood-themed setup. The three pre-installed hydraulic bearing 120mm ARGB Lite fans provide illuminated intake and exhaust. Their RGB lighting can be controlled through motherboard software from ASUS, GIGABYTE, MSI and ASRock. Up to nine 120mm fans can be fitted in total for expanded cooling.
The mid tower footprint keeps the build compact while fitting the listed hardware. A 360mm radiator can be mounted on the top and the case accepts air coolers up to 180mm in height. Graphics cards up to 420mm in length and power supplies up to 220mm in length are supported. Builders needing longer GPUs, larger radiators or additional drive bays beyond the standard layout will find the chassis restrictive.
| Brand | Thermaltake |
|---|---|
| Series | Thermaltake View 270 Plus WS ARGB |
| Model | CA-1Y7-00M1WN-WS |
| Type | E-ATX Mid Tower Chassis |
| Color | Black |
| Case Material | Sporting a combination of mesh and tempered glass |
| Side Panel | 2 x Sides Tempered Glass Panel |
| Fan Options | 3x120mm ARGB Lite Fans |
| Pre-installed Fans | Rear - 1 x 120mm / Side - 2 x 120mm |
| Radiator Options | 360mm Radiator Support |
| 120mm Fans | 9 |
| Max GPU Length | 420mm GPU Clearance |
| Max PSU Length | 220mm PSU Clearance |
| Dimensions | 17.9 x 9 x 18 inch |
| Weight | 15 |
| Sūtījuma svars | 7.98 kg |
| Sūtījuma izmēri | 521 × 516 × 290 mm |
The three hydraulic-bearing 120 mm ARGB Lite fans are pre-installed at the side and rear; clean dust from their frames and filters every few months and replace only if bearing noise or vibration appears.
The top-mounted 360 mm radiator exhausts heat directly upward, so coolant temperature rise — not chassis airflow — becomes the first bottleneck during prolonged heavy loads.
With up to nine 120 mm fans the mesh-and-glass layout moves large air volumes; noise scales with fan speed curves, while the open top and side vents keep internal temperatures close to ambient.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?