Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black M.2 SATA NGFF to SATA adapter board, 6.93 by 4.21 by .35 inches, supports 2230 2242 2260 2280 sizes

WRIARICH

WRIARICH M.2 SATA NGFF to SATA Adapter B Key B+M Key 2230 2242 2260 2280 6Gbps 4TB

SKU CH-PPT3-2B5KF

Converts M.2 SATA SSDs in 2230, 2242, 2260 and 2280 sizes to a 2.5 inch SATA 3.0 interface at 6Gbps, supporting up to 4TB capacity

  • ColorBlack
  • Dimensions6.93 in x 4.21 in x 0.35 in
  • Package ContentsNon
  • Supports M.2 NGFF SATA SSDs in 2230 2242 2260 2280 sizes
  • Theoretical 6Gbps SATA 3.0 transfer rate for fast data access
  • Plug-and-play installation requires no extra drivers
  • Compatible with Windows 7 8 10 11 Mac OS Linux
  • Accepts up to 4TB capacity with backward compatibility down to 128GB

M.2 SATA NGFF adapter for 2.5" bays

This adapter converts M.2 SATA NGFF solid-state drives in 2230, 2242, 2260 and 2280 lengths with B key or B+M key to a standard 2.5 inch SATA interface. It is built for users who want to install NGFF drives in laptop bays, desktop trays or external enclosures that accept 2.5 inch SATA devices. NVME and PCI-E SSDs are not supported.

Dual-drive capacity up to 4 TB

Two NGFF SATA SSDs can be installed simultaneously and appear as a JBOD span, with a combined ceiling of 4 TB. The board is backward compatible with 128 GB, 256 GB, 512 GB, 1 TB and 2 TB modules. Theoretical SATA 3.0 bandwidth is 6 Gbps; real-world throughput reaches about 500 MB/s and varies with the drives and host configuration.

Passive thermals and driver-free operation

The black PCB measures 6.93 in by 4.21 in by .35 in and adds no active cooling, so it runs silently and draws negligible power beyond the SSDs themselves. Installation is plug-and-play with no extra drivers required on Windows 7, 8, 10, 11, Mac OS or Linux.

Istaknuto

  • Supports M.2 NGFF SATA SSDs in 2230 2242 2260 2280 sizes
  • Theoretical 6Gbps SATA 3.0 transfer rate for fast data access
  • Plug-and-play installation requires no extra drivers
  • Compatible with Windows 7 8 10 11 Mac OS Linux
  • Accepts up to 4TB capacity with backward compatibility down to 128GB

Specifikacije

BrandELUTENG
ModelM.2 SATA (NGFF) to SATA
ColorBlack
Dimensions6.93 in x 4.21 in x 0.35 in
Package ContentsNon

Pitanja o ovom artiklu

Will this adapter let me keep using my 2280 B-key SATA SSD alongside a newer NVMe boot drive?

Yes, the adapter accepts 2280 B-key and B+M-key NGFF SATA SSDs and presents them over a SATA 3.0 link, so they can coexist with an NVMe system drive.

How can I confirm the 6 Gbps link is active after I install the module?

Check the negotiated link speed in your OS disk utility or BIOS; a SATA 3.0 connection will report 6 Gbps when the NGFF SSD is seated correctly.

Does the package include mounting screws or a 2.5″ drive caddy for the 6.93 in × 4.21 in board?

The supplier lists no package contents, so screws, cables and any 2.5″ caddy must be sourced separately.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.