Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black M.2 SATA NGFF to SATA adapter board, 6.93 by 4.21 by .35 inches, supports 2230 2242 2260 2280 sizes

WRIARICH

WRIARICH M.2 SATA NGFF to SATA Adapter B Key B+M Key 2230 2242 2260 2280 6Gbps 4TB

SKU CH-PPT3-2B5KF

Converts M.2 SATA SSDs in 2230, 2242, 2260 and 2280 sizes to a 2.5 inch SATA 3.0 interface at 6Gbps, supporting up to 4TB capacity

  • ColorBlack
  • Dimensions6.93 in x 4.21 in x 0.35 in
  • Package ContentsNon
  • Supports M.2 NGFF SATA SSDs in 2230 2242 2260 2280 sizes
  • Theoretical 6Gbps SATA 3.0 transfer rate for fast data access
  • Plug-and-play installation requires no extra drivers
  • Compatible with Windows 7 8 10 11 Mac OS Linux
  • Accepts up to 4TB capacity with backward compatibility down to 128GB

M.2 SATA NGFF adapter for 2.5" bays

This adapter converts M.2 SATA NGFF solid-state drives in 2230, 2242, 2260 and 2280 lengths with B key or B+M key to a standard 2.5 inch SATA interface. It is built for users who want to install NGFF drives in laptop bays, desktop trays or external enclosures that accept 2.5 inch SATA devices. NVME and PCI-E SSDs are not supported.

Dual-drive capacity up to 4 TB

Two NGFF SATA SSDs can be installed simultaneously and appear as a JBOD span, with a combined ceiling of 4 TB. The board is backward compatible with 128 GB, 256 GB, 512 GB, 1 TB and 2 TB modules. Theoretical SATA 3.0 bandwidth is 6 Gbps; real-world throughput reaches about 500 MB/s and varies with the drives and host configuration.

Passive thermals and driver-free operation

The black PCB measures 6.93 in by 4.21 in by .35 in and adds no active cooling, so it runs silently and draws negligible power beyond the SSDs themselves. Installation is plug-and-play with no extra drivers required on Windows 7, 8, 10, 11, Mac OS or Linux.

Helstu kostir

  • Supports M.2 NGFF SATA SSDs in 2230 2242 2260 2280 sizes
  • Theoretical 6Gbps SATA 3.0 transfer rate for fast data access
  • Plug-and-play installation requires no extra drivers
  • Compatible with Windows 7 8 10 11 Mac OS Linux
  • Accepts up to 4TB capacity with backward compatibility down to 128GB

Tæknilýsing

BrandELUTENG
ModelM.2 SATA (NGFF) to SATA
ColorBlack
Dimensions6.93 in x 4.21 in x 0.35 in
Package ContentsNon

Spurningar um þessa vöru

Will this adapter let me keep using my 2280 B-key SATA SSD alongside a newer NVMe boot drive?

Yes, the adapter accepts 2280 B-key and B+M-key NGFF SATA SSDs and presents them over a SATA 3.0 link, so they can coexist with an NVMe system drive.

How can I confirm the 6 Gbps link is active after I install the module?

Check the negotiated link speed in your OS disk utility or BIOS; a SATA 3.0 connection will report 6 Gbps when the NGFF SSD is seated correctly.

Does the package include mounting screws or a 2.5″ drive caddy for the 6.93 in × 4.21 in board?

The supplier lists no package contents, so screws, cables and any 2.5″ caddy must be sourced separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.