NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
32 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V operation for compatible microserver upgrades
This 32GB DDR4 2933MHz ECC SODIMM module is built for microserver, server and workstation laptops that require error-correcting memory. It runs at PC4-23400 speed with CL21 latency and standard 1.20V voltage. The unbuffered 260-pin design fits compatible SO-DIMM slots in compact enterprise systems.
The module serves as a direct compatible replacement for the Hynix HMAA4GS7AJR8N-WM part. The upgrade is worth it when your current system shows memory pressure under multi-threaded workloads or virtualisation tasks. Adding ECC protection helps prevent data corruption in always-on environments where uptime matters.
One 32GB stick provides substantial headroom for running multiple virtual machines, large databases or heavy container workloads without swapping. The single-module layout leaves additional SO-DIMM slots free for future expansion if the platform supports more than 32GB total. Systems limited to lower maximum memory per slot or non-ECC architectures cannot use this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GS7AJR8N-WM |
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA4GS7AJR8N-WM |
| Recommend Use | Compatible Replacement for Hynix HMAA4GS7AJR8N-WM |
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any slot built for DDR4 SO-DIMMs, but you must confirm your system accepts 32 GB unbuffered ECC modules before buying.
Align the notch on the module with the key in the slot, press straight down with even pressure until the side retention clips snap into the notches on the PCB.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it runs maintenance-free for the life of the system.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?