NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
32 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V operation for compatible microserver upgrades
This 32GB DDR4 2933MHz ECC SODIMM module is built for microserver, server and workstation laptops that require error-correcting memory. It runs at PC4-23400 speed with CL21 latency and standard 1.20V voltage. The unbuffered 260-pin design fits compatible SO-DIMM slots in compact enterprise systems.
The module serves as a direct compatible replacement for the Hynix HMAA4GS7AJR8N-WM part. The upgrade is worth it when your current system shows memory pressure under multi-threaded workloads or virtualisation tasks. Adding ECC protection helps prevent data corruption in always-on environments where uptime matters.
One 32GB stick provides substantial headroom for running multiple virtual machines, large databases or heavy container workloads without swapping. The single-module layout leaves additional SO-DIMM slots free for future expansion if the platform supports more than 32GB total. Systems limited to lower maximum memory per slot or non-ECC architectures cannot use this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GS7AJR8N-WM |
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA4GS7AJR8N-WM |
| Recommend Use | Compatible Replacement for Hynix HMAA4GS7AJR8N-WM |
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any slot built for DDR4 SO-DIMMs, but you must confirm your system accepts 32 GB unbuffered ECC modules before buying.
Align the notch on the module with the key in the slot, press straight down with even pressure until the side retention clips snap into the notches on the PCB.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it runs maintenance-free for the life of the system.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?