NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
32 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V operation for compatible microserver upgrades
This 32GB DDR4 2933MHz ECC SODIMM module is built for microserver, server and workstation laptops that require error-correcting memory. It runs at PC4-23400 speed with CL21 latency and standard 1.20V voltage. The unbuffered 260-pin design fits compatible SO-DIMM slots in compact enterprise systems.
The module serves as a direct compatible replacement for the Hynix HMAA4GS7AJR8N-WM part. The upgrade is worth it when your current system shows memory pressure under multi-threaded workloads or virtualisation tasks. Adding ECC protection helps prevent data corruption in always-on environments where uptime matters.
One 32GB stick provides substantial headroom for running multiple virtual machines, large databases or heavy container workloads without swapping. The single-module layout leaves additional SO-DIMM slots free for future expansion if the platform supports more than 32GB total. Systems limited to lower maximum memory per slot or non-ECC architectures cannot use this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GS7AJR8N-WM |
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA4GS7AJR8N-WM |
| Recommend Use | Compatible Replacement for Hynix HMAA4GS7AJR8N-WM |
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any slot built for DDR4 SO-DIMMs, but you must confirm your system accepts 32 GB unbuffered ECC modules before buying.
Align the notch on the module with the key in the slot, press straight down with even pressure until the side retention clips snap into the notches on the PCB.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it runs maintenance-free for the life of the system.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?