NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
32 GB DDR4 ECC SODIMM at 2933 MHz with CL21 latency and 1.2 V operation for compatible microserver upgrades
This 32GB DDR4 2933MHz ECC SODIMM module is built for microserver, server and workstation laptops that require error-correcting memory. It runs at PC4-23400 speed with CL21 latency and standard 1.20V voltage. The unbuffered 260-pin design fits compatible SO-DIMM slots in compact enterprise systems.
The module serves as a direct compatible replacement for the Hynix HMAA4GS7AJR8N-WM part. The upgrade is worth it when your current system shows memory pressure under multi-threaded workloads or virtualisation tasks. Adding ECC protection helps prevent data corruption in always-on environments where uptime matters.
One 32GB stick provides substantial headroom for running multiple virtual machines, large databases or heavy container workloads without swapping. The single-module layout leaves additional SO-DIMM slots free for future expansion if the platform supports more than 32GB total. Systems limited to lower maximum memory per slot or non-ECC architectures cannot use this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMAA4GS7AJR8N-WM |
| Capacity | 32GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | HMAA4GS7AJR8N-WM |
| Recommend Use | Compatible Replacement for Hynix HMAA4GS7AJR8N-WM |
The module uses the standard 260-pin DDR4 SO-DIMM form factor. It fits any slot built for DDR4 SO-DIMMs, but you must confirm your system accepts 32 GB unbuffered ECC modules before buying.
Align the notch on the module with the key in the slot, press straight down with even pressure until the side retention clips snap into the notches on the PCB.
No firmware updates are required for the memory itself. The module has no moving parts and no heat spreader, so it runs maintenance-free for the life of the system.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?