NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with 2Rx8 organisation and CL22 latency for server and workstation upgrades
This 32GB DDR4 3200 ECC registered DIMM targets server and workstation builders who need error-correcting memory for stable operation under heavy workloads. The 2Rx8 organisation and CL22 latency suit multi-socket platforms that require registered modules. It runs at the standard 1.20V DDR4 voltage.
The module is a direct equivalent for the Samsung M393A4G43AB3-CWE part, so it replaces that specific OEM stick when a system calls for 32GB of PC4-25600 registered ECC memory. The jump is worth it when your board demands registered DIMMs and you need the full 32GB capacity in a single slot. Non-ECC or unbuffered memory will not work in those slots.
Installation follows the standard 288-pin DDR4 DIMM procedure: align the notch, press firmly until the retention clips engage, then verify the module is seated evenly. The usual issue is mixing registered and unbuffered DIMMs on the same channel, which prevents the system from posting. Always confirm your platform supports registered ECC before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by compatible server and workstation boards.
Align the notch with the slot key, press firmly until both retention clips click, and verify in BIOS that the memory runs at 3200 MHz CL22 1.20 V.
DDR4 registered ECC modules typically run for many years; replace only if memory diagnostics report correctable errors that increase over time.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?