NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with 2Rx8 organisation and CL22 latency for server and workstation upgrades
This 32GB DDR4 3200 ECC registered DIMM targets server and workstation builders who need error-correcting memory for stable operation under heavy workloads. The 2Rx8 organisation and CL22 latency suit multi-socket platforms that require registered modules. It runs at the standard 1.20V DDR4 voltage.
The module is a direct equivalent for the Samsung M393A4G43AB3-CWE part, so it replaces that specific OEM stick when a system calls for 32GB of PC4-25600 registered ECC memory. The jump is worth it when your board demands registered DIMMs and you need the full 32GB capacity in a single slot. Non-ECC or unbuffered memory will not work in those slots.
Installation follows the standard 288-pin DDR4 DIMM procedure: align the notch, press firmly until the retention clips engage, then verify the module is seated evenly. The usual issue is mixing registered and unbuffered DIMMs on the same channel, which prevents the system from posting. Always confirm your platform supports registered ECC before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by compatible server and workstation boards.
Align the notch with the slot key, press firmly until both retention clips click, and verify in BIOS that the memory runs at 3200 MHz CL22 1.20 V.
DDR4 registered ECC modules typically run for many years; replace only if memory diagnostics report correctable errors that increase over time.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?