NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with 2Rx8 organisation and CL22 latency for server and workstation upgrades
This 32GB DDR4 3200 ECC registered DIMM targets server and workstation builders who need error-correcting memory for stable operation under heavy workloads. The 2Rx8 organisation and CL22 latency suit multi-socket platforms that require registered modules. It runs at the standard 1.20V DDR4 voltage.
The module is a direct equivalent for the Samsung M393A4G43AB3-CWE part, so it replaces that specific OEM stick when a system calls for 32GB of PC4-25600 registered ECC memory. The jump is worth it when your board demands registered DIMMs and you need the full 32GB capacity in a single slot. Non-ECC or unbuffered memory will not work in those slots.
Installation follows the standard 288-pin DDR4 DIMM procedure: align the notch, press firmly until the retention clips engage, then verify the module is seated evenly. The usual issue is mixing registered and unbuffered DIMMs on the same channel, which prevents the system from posting. Always confirm your platform supports registered ECC before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by compatible server and workstation boards.
Align the notch with the slot key, press firmly until both retention clips click, and verify in BIOS that the memory runs at 3200 MHz CL22 1.20 V.
DDR4 registered ECC modules typically run for many years; replace only if memory diagnostics report correctable errors that increase over time.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?