NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
32 GB DDR4 3200 ECC registered DIMM with 2Rx8 organisation and CL22 latency for server and workstation upgrades
This 32GB DDR4 3200 ECC registered DIMM targets server and workstation builders who need error-correcting memory for stable operation under heavy workloads. The 2Rx8 organisation and CL22 latency suit multi-socket platforms that require registered modules. It runs at the standard 1.20V DDR4 voltage.
The module is a direct equivalent for the Samsung M393A4G43AB3-CWE part, so it replaces that specific OEM stick when a system calls for 32GB of PC4-25600 registered ECC memory. The jump is worth it when your board demands registered DIMMs and you need the full 32GB capacity in a single slot. Non-ECC or unbuffered memory will not work in those slots.
Installation follows the standard 288-pin DDR4 DIMM procedure: align the notch, press firmly until the retention clips engage, then verify the module is seated evenly. The usual issue is mixing registered and unbuffered DIMMs on the same channel, which prevents the system from posting. Always confirm your platform supports registered ECC before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Yes, the module uses the standard 288-pin DDR4 DIMM form factor used by compatible server and workstation boards.
Align the notch with the slot key, press firmly until both retention clips click, and verify in BIOS that the memory runs at 3200 MHz CL22 1.20 V.
DDR4 registered ECC modules typically run for many years; replace only if memory diagnostics report correctable errors that increase over time.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?