NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
DARKROCK
E-ATX mid-tower chassis holds 13 drives (10 × 3.5″ HDD, 3 × 2.5″ SSD), fits a 360 mm top radiator and 400 mm GPU, and includes seven 120 mm ARGB infinity-mirror fans for high-airflow cooling
The DARKROCK Classico Max Storage Master is an E-ATX mid-tower chassis finished in black with mesh panels for airflow. It accepts Micro-ATX, ATX and Extended-ATX motherboards, though the drive cages must be removed to fit an E-ATX board. Seven expansion slots and a 400 mm maximum graphics-card length give room for large GPUs.
The case includes three vertical PCI slots so a graphics card can be mounted upright, creating parallel front-to-rear air ducts. A 360 mm radiator can be installed in the top panel for liquid-cooling upgrades. Builders moving from a standard ATX case with limited radiator space will gain the clearance needed for a thick triple-fan loop.
Ten 3.5-inch and three 2.5-inch bays provide capacity for up to 13 drives, covering large media libraries or local backup arrays. The 180 mm CPU-cooler height limit and 200 mm power-supply length limit mean very tall air coolers or extra-long PSUs will not fit. Users needing more than 13 drives or dual-loop radiators should look elsewhere.
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Color | Black |
| Motherboard Compatibility | Micro ATX / ATX / Extended ATX |
| Dust Filters | Yes |
| Expansion Slots | 7 |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 200 mm |
The top panel supports a 360 mm radiator with standard 120 mm fan spacing; ensure the motherboard heatsinks do not exceed the 400 mm GPU length limit when the radiator is mounted.
Remove the 3.5-inch and 2.5-inch drive cages first, then install the E-ATX motherboard; reinstall cages only if they fit without blocking the board edges.
Clean the magnetic dust filters every three to six months depending on ambient dust; the front and top mesh panels lift off for quick access without tools.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?