TAURKENAM
TAURKENAM Under-Desk CPU Mount 3.94–11.61 in 360° Swivel 44 lbs
51,99 $US
0.00066231BTC
En stock
DARKROCK
DARKROCK Classico Max Storage Master E-ATX PC Case 13-Drive 360mm Radiator
E-ATX mid-tower chassis holds 13 drives (10 × 3.5″ HDD, 3 × 2.5″ SSD), fits a 360 mm top radiator and 400 mm GPU, and includes seven 120 mm ARGB infinity-mirror fans for high-airflow cooling
- TypeE-ATX Mid Tower Chassis
- ColorBlack
- Motherboard CompatibilityMicro ATX / ATX / Extended ATX
- Dust FiltersYes
- Expansion Slots7
- Max GPU Length400 mm
- Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
- Mount graphics cards vertically using three dedicated slots for improved airflow
- Fit E-ATX boards after removing the drive cages for full-size builds
- Cool with a top-mounted 360 mm radiator for high-end liquid cooling
- Mesh panels and seven pre-installed fans deliver strong airflow across components
13-Drive E-ATX Chassis
The DARKROCK Classico Max Storage Master is an E-ATX mid-tower chassis finished in black with mesh panels for airflow. It accepts Micro-ATX, ATX and Extended-ATX motherboards, though the drive cages must be removed to fit an E-ATX board. Seven expansion slots and a 400 mm maximum graphics-card length give room for large GPUs.
Vertical GPU Mount and 360 mm Radiator Support
The case includes three vertical PCI slots so a graphics card can be mounted upright, creating parallel front-to-rear air ducts. A 360 mm radiator can be installed in the top panel for liquid-cooling upgrades. Builders moving from a standard ATX case with limited radiator space will gain the clearance needed for a thick triple-fan loop.
10 x 3.5-Inch and 3 x 2.5-Inch Drive Bays
Ten 3.5-inch and three 2.5-inch bays provide capacity for up to 13 drives, covering large media libraries or local backup arrays. The 180 mm CPU-cooler height limit and 200 mm power-supply length limit mean very tall air coolers or extra-long PSUs will not fit. Users needing more than 13 drives or dual-loop radiators should look elsewhere.
Points forts
- Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
- Mount graphics cards vertically using three dedicated slots for improved airflow
- Fit E-ATX boards after removing the drive cages for full-size builds
- Cool with a top-mounted 360 mm radiator for high-end liquid cooling
- Mesh panels and seven pre-installed fans deliver strong airflow across components
Caractéristiques
| Type | E-ATX Mid Tower Chassis |
|---|---|
| Color | Black |
| Motherboard Compatibility | Micro ATX / ATX / Extended ATX |
| Dust Filters | Yes |
| Expansion Slots | 7 |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | 180 mm |
| Max PSU Length | 200 mm |
Questions sur cet article
How much clearance do I have for a 360 mm radiator in the top of the case?
The top panel supports a 360 mm radiator with standard 120 mm fan spacing; ensure the motherboard heatsinks do not exceed the 400 mm GPU length limit when the radiator is mounted.
What is the correct order for installing an E-ATX board and the drive cages?
Remove the 3.5-inch and 2.5-inch drive cages first, then install the E-ATX motherboard; reinstall cages only if they fit without blocking the board edges.
When should I clean the dust filters on this mesh-panel case?
Clean the magnetic dust filters every three to six months depending on ambient dust; the front and top mesh panels lift off for quick access without tools.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
Silverstone Technology
Silverstone Decathlon R Gold 750W ATX 3.0 power supply
146,99 $US
0.00187253BTC
En stock
Silverstone Technology
Silverstone Technology FA311-B FARA 311 Micro-ATX PC case
- Micro ATX
62,99 $US
0.00080244BTC
En stock