We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black E-ATX mid-tower case with mesh front panel, three infinity-mirror 120 mm fans visible behind glass

DARKROCK

DARKROCK Classico Max Storage Master E-ATX PC Case 13-Drive 360mm Radiator

SKU CH-J99B-QYPTV

E-ATX mid-tower chassis holds 13 drives (10 × 3.5″ HDD, 3 × 2.5″ SSD), fits a 360 mm top radiator and 400 mm GPU, and includes seven 120 mm ARGB infinity-mirror fans for high-airflow cooling

  • TypeE-ATX Mid Tower Chassis
  • ColorBlack
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Dust FiltersYes
  • Expansion Slots7
  • Max GPU Length400 mm
  • Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
  • Mount graphics cards vertically using three dedicated slots for improved airflow
  • Fit E-ATX boards after removing the drive cages for full-size builds
  • Cool with a top-mounted 360 mm radiator for high-end liquid cooling
  • Mesh panels and seven pre-installed fans deliver strong airflow across components

13-Drive E-ATX Chassis

The DARKROCK Classico Max Storage Master is an E-ATX mid-tower chassis finished in black with mesh panels for airflow. It accepts Micro-ATX, ATX and Extended-ATX motherboards, though the drive cages must be removed to fit an E-ATX board. Seven expansion slots and a 400 mm maximum graphics-card length give room for large GPUs.

Vertical GPU Mount and 360 mm Radiator Support

The case includes three vertical PCI slots so a graphics card can be mounted upright, creating parallel front-to-rear air ducts. A 360 mm radiator can be installed in the top panel for liquid-cooling upgrades. Builders moving from a standard ATX case with limited radiator space will gain the clearance needed for a thick triple-fan loop.

10 x 3.5-Inch and 3 x 2.5-Inch Drive Bays

Ten 3.5-inch and three 2.5-inch bays provide capacity for up to 13 drives, covering large media libraries or local backup arrays. The 180 mm CPU-cooler height limit and 200 mm power-supply length limit mean very tall air coolers or extra-long PSUs will not fit. Users needing more than 13 drives or dual-loop radiators should look elsewhere.

Highlights

  • Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
  • Mount graphics cards vertically using three dedicated slots for improved airflow
  • Fit E-ATX boards after removing the drive cages for full-size builds
  • Cool with a top-mounted 360 mm radiator for high-end liquid cooling
  • Mesh panels and seven pre-installed fans deliver strong airflow across components

Specifications

TypeE-ATX Mid Tower Chassis
ColorBlack
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Dust FiltersYes
Expansion Slots7
Max GPU Length400 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm

Questions about this item

How much clearance do I have for a 360 mm radiator in the top of the case?

The top panel supports a 360 mm radiator with standard 120 mm fan spacing; ensure the motherboard heatsinks do not exceed the 400 mm GPU length limit when the radiator is mounted.

What is the correct order for installing an E-ATX board and the drive cages?

Remove the 3.5-inch and 2.5-inch drive cages first, then install the E-ATX motherboard; reinstall cages only if they fit without blocking the board edges.

When should I clean the dust filters on this mesh-panel case?

Clean the magnetic dust filters every three to six months depending on ambient dust; the front and top mesh panels lift off for quick access without tools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.