Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black E-ATX mid-tower case with mesh front panel, three infinity-mirror 120 mm fans visible behind glass

DARKROCK

DARKROCK Classico Max Storage Master E-ATX PC Case 13-Drive 360mm Radiator

SKU CH-J99B-QYPTV

E-ATX mid-tower chassis holds 13 drives (10 × 3.5″ HDD, 3 × 2.5″ SSD), fits a 360 mm top radiator and 400 mm GPU, and includes seven 120 mm ARGB infinity-mirror fans for high-airflow cooling

  • TypeE-ATX Mid Tower Chassis
  • ColorBlack
  • Motherboard CompatibilityMicro ATX / ATX / Extended ATX
  • Dust FiltersYes
  • Expansion Slots7
  • Max GPU Length400 mm
  • Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
  • Mount graphics cards vertically using three dedicated slots for improved airflow
  • Fit E-ATX boards after removing the drive cages for full-size builds
  • Cool with a top-mounted 360 mm radiator for high-end liquid cooling
  • Mesh panels and seven pre-installed fans deliver strong airflow across components

13-Drive E-ATX Chassis

The DARKROCK Classico Max Storage Master is an E-ATX mid-tower chassis finished in black with mesh panels for airflow. It accepts Micro-ATX, ATX and Extended-ATX motherboards, though the drive cages must be removed to fit an E-ATX board. Seven expansion slots and a 400 mm maximum graphics-card length give room for large GPUs.

Vertical GPU Mount and 360 mm Radiator Support

The case includes three vertical PCI slots so a graphics card can be mounted upright, creating parallel front-to-rear air ducts. A 360 mm radiator can be installed in the top panel for liquid-cooling upgrades. Builders moving from a standard ATX case with limited radiator space will gain the clearance needed for a thick triple-fan loop.

10 x 3.5-Inch and 3 x 2.5-Inch Drive Bays

Ten 3.5-inch and three 2.5-inch bays provide capacity for up to 13 drives, covering large media libraries or local backup arrays. The 180 mm CPU-cooler height limit and 200 mm power-supply length limit mean very tall air coolers or extra-long PSUs will not fit. Users needing more than 13 drives or dual-loop radiators should look elsewhere.

Kohokohdat

  • Store up to 13 drives with 10 x 3.5 and 3 x 2.5 bays
  • Mount graphics cards vertically using three dedicated slots for improved airflow
  • Fit E-ATX boards after removing the drive cages for full-size builds
  • Cool with a top-mounted 360 mm radiator for high-end liquid cooling
  • Mesh panels and seven pre-installed fans deliver strong airflow across components

Tekniset tiedot

TypeE-ATX Mid Tower Chassis
ColorBlack
Motherboard CompatibilityMicro ATX / ATX / Extended ATX
Dust FiltersYes
Expansion Slots7
Max GPU Length400 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm

Kysymyksiä tästä tuotteesta

How much clearance do I have for a 360 mm radiator in the top of the case?

The top panel supports a 360 mm radiator with standard 120 mm fan spacing; ensure the motherboard heatsinks do not exceed the 400 mm GPU length limit when the radiator is mounted.

What is the correct order for installing an E-ATX board and the drive cages?

Remove the 3.5-inch and 2.5-inch drive cages first, then install the E-ATX motherboard; reinstall cages only if they fit without blocking the board edges.

When should I clean the dust filters on this mesh-panel case?

Clean the magnetic dust filters every three to six months depending on ambient dust; the front and top mesh panels lift off for quick access without tools.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.