LUOM TSB02F laptop cooling pad dual fan 11-17.3 inch black
- Stand
- Black
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
DELL
Replacement motherboard for OptiPlex 7050 Micro with LGA1151 socket and Q270 chipset
This replacement motherboard fits the Dell OptiPlex 7050 Micro chassis and uses the Intel Q270 chipset with an LGA1151 socket. It supports 6th and 7th generation Intel Core i3, i5 and i7 processors including the i7-7700 and i7-7700T. The board provides two DDR4 SODIMM slots for up to 32 GB of memory running at 2400MHz. It is intended for technicians repairing or refreshing these specific micro form factor units.
A direct swap restores the system to factory specification without changing the chassis, power supply or cooler. The jump is worth it when the existing board has faulty I/O, memory slots or CPU socket damage. Builders who need a different socket, a newer chipset or more than two memory slots cannot use this part. It does not support processors outside the listed 6th and 7th generation Core families.
The board runs the supported CPUs at their rated frequencies within the original thermal design of the 7050 Micro. Memory operates at 2400MHz across both slots under continuous load. Storage throughput depends on the installed drive using the M.2 2280 slot for NVMe or SATA and the 2.5 inch SATA port. The VRM and chipset cooling rely on the system's integrated blower; no additional cooling provisions exist on the board itself.
| Brand | Dell |
|---|---|
| Model | DB-MFF-SF |
| Part Number | D24M8 |
| Compatible Manufacturer | For Dell |
| Compatible Models | For Dell OptiPlex 7050 Micro |
| Color | Green |
Yes, the motherboard is built for the OptiPlex 7050 Micro form factor and mounts directly to the chassis standoffs using the existing screw pattern.
Install the LGA1151 processor first, lock the retention lever, apply thermal paste, attach the Micro-specific cooler, then press the DDR4 SODIMMs into the two slots until they click.
The M.2 2280 slot accepts PCIe NVMe or SATA SSDs, and the 2.5-inch bay takes a SATA HDD or SSD; both can be used simultaneously.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?