ESTONE C08LS Laptop Stand Aluminium Black 10-15.6in
- Stand
- Black
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
DELL
Replacement motherboard for OptiPlex 7050 Micro with LGA1151 socket and Q270 chipset
This replacement motherboard fits the Dell OptiPlex 7050 Micro chassis and uses the Intel Q270 chipset with an LGA1151 socket. It supports 6th and 7th generation Intel Core i3, i5 and i7 processors including the i7-7700 and i7-7700T. The board provides two DDR4 SODIMM slots for up to 32 GB of memory running at 2400MHz. It is intended for technicians repairing or refreshing these specific micro form factor units.
A direct swap restores the system to factory specification without changing the chassis, power supply or cooler. The jump is worth it when the existing board has faulty I/O, memory slots or CPU socket damage. Builders who need a different socket, a newer chipset or more than two memory slots cannot use this part. It does not support processors outside the listed 6th and 7th generation Core families.
The board runs the supported CPUs at their rated frequencies within the original thermal design of the 7050 Micro. Memory operates at 2400MHz across both slots under continuous load. Storage throughput depends on the installed drive using the M.2 2280 slot for NVMe or SATA and the 2.5 inch SATA port. The VRM and chipset cooling rely on the system's integrated blower; no additional cooling provisions exist on the board itself.
| Brand | Dell |
|---|---|
| Model | DB-MFF-SF |
| Part Number | D24M8 |
| Compatible Manufacturer | For Dell |
| Compatible Models | For Dell OptiPlex 7050 Micro |
| Color | Green |
Yes, the motherboard is built for the OptiPlex 7050 Micro form factor and mounts directly to the chassis standoffs using the existing screw pattern.
Install the LGA1151 processor first, lock the retention lever, apply thermal paste, attach the Micro-specific cooler, then press the DDR4 SODIMMs into the two slots until they click.
The M.2 2280 slot accepts PCIe NVMe or SATA SSDs, and the 2.5-inch bay takes a SATA HDD or SSD; both can be used simultaneously.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?