Targus ASP48USX security lock 6.0 ft Kensington T-Bar keyed
- Lock
- Black
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
DELL
Replacement motherboard for OptiPlex 7050 Micro with LGA1151 socket and Q270 chipset
This replacement motherboard fits the Dell OptiPlex 7050 Micro chassis and uses the Intel Q270 chipset with an LGA1151 socket. It supports 6th and 7th generation Intel Core i3, i5 and i7 processors including the i7-7700 and i7-7700T. The board provides two DDR4 SODIMM slots for up to 32 GB of memory running at 2400MHz. It is intended for technicians repairing or refreshing these specific micro form factor units.
A direct swap restores the system to factory specification without changing the chassis, power supply or cooler. The jump is worth it when the existing board has faulty I/O, memory slots or CPU socket damage. Builders who need a different socket, a newer chipset or more than two memory slots cannot use this part. It does not support processors outside the listed 6th and 7th generation Core families.
The board runs the supported CPUs at their rated frequencies within the original thermal design of the 7050 Micro. Memory operates at 2400MHz across both slots under continuous load. Storage throughput depends on the installed drive using the M.2 2280 slot for NVMe or SATA and the 2.5 inch SATA port. The VRM and chipset cooling rely on the system's integrated blower; no additional cooling provisions exist on the board itself.
| Brand | Dell |
|---|---|
| Model | DB-MFF-SF |
| Part Number | D24M8 |
| Compatible Manufacturer | For Dell |
| Compatible Models | For Dell OptiPlex 7050 Micro |
| Color | Green |
Yes, the motherboard is built for the OptiPlex 7050 Micro form factor and mounts directly to the chassis standoffs using the existing screw pattern.
Install the LGA1151 processor first, lock the retention lever, apply thermal paste, attach the Micro-specific cooler, then press the DDR4 SODIMMs into the two slots until they click.
The M.2 2280 slot accepts PCIe NVMe or SATA SSDs, and the 2.5-inch bay takes a SATA HDD or SSD; both can be used simultaneously.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?