Flashforge
Flashforge Nozzle Assembly Adventurer 5M Series 0.8mm 280C 3d printers accessory
High-speed 0.8 mm nozzle delivers 32 mm³/s flow, heats to 280 °C in 35 seconds and swaps in three seconds for carbon-fibre and glass-fibre filaments
- TypePrint Jet Head
Option 0.8mm
- 0.6mm
- 0.4mm
- 0.25mm
- 0.8mm
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
- High-speed printing with 32 mm³/s flow rate
- Reaches 200 °C in 35 seconds with 50 W heating
- Prints advanced filaments up to 280 °C nozzle temperature
- Quick-release design enables nozzle swap in 3 seconds
- 8 mm diameter suits carbon fibre and glass fibre filaments
Nozzle for Adventurer 5M Series
This 0.8 mm nozzle assembly fits the Adventurer 5M and Adventurer 5M Pro printers. It supports filament types that require higher abrasion resistance such as carbon fibre, glass fibre, wood and speciality PLA blends. The quick-release mechanism lets you swap the nozzle in roughly three seconds without tools.
Sustained high-temperature printing
The nozzle reaches 200 °C in 35 seconds with a 50 W heater and maintains up to 280 °C for continuous extrusion. It delivers a volumetric flow of 32 mm³/s, so layer heights of 0.3 mm or 0.4 mm run steadily without the slowdowns seen in short-burst tests.
Upgrade from smaller diameters
Replacing a 0.25 mm or 0.4 mm nozzle with this 0.8 mm version cuts print time on large parts by using thicker layers. The jump is worth it when you print abrasive composites or need faster throughput and can accept the reduced detail of 0.3 mm to 0.4 mm layers.
Erősségek
- High-speed printing with 32 mm³/s flow rate
- Reaches 200 °C in 35 seconds with 50 W heating
- Prints advanced filaments up to 280 °C nozzle temperature
- Quick-release design enables nozzle swap in 3 seconds
- 8 mm diameter suits carbon fibre and glass fibre filaments
Műszaki adatok
| Brand | Flashforge |
|---|---|
| Type | Print Jet Head |
Kérdések a termékről
How much heat and power does the 0.8 mm nozzle draw during a full-day print?
The nozzle runs on a 50 W heater that reaches 200 °C in 35 seconds and can sustain up to 280 °C for continuous printing.
Which printer must I already own for this nozzle to fit and work?
It is designed for the Flashforge Adventurer 5M series, matching the original print jet head on the AD5M and AD5M Pro.
Will the 0.8 mm nozzle work with the standard 0.4 mm hot-end parts I already have?
The 0.8 mm diameter is a separate quick-release nozzle; layer heights of 0.3 mm or 0.4 mm are recommended for efficient printing with abrasive filaments.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Lay Filaments
Lay Filaments PLA-Y-Soft 3D printer filament 3.0mm 0.25kg
20,99 USD
0.00026956BTC
Raktáron
Lay Filaments
Lay Filaments PLA-Y-Soft 1.75mm .25kg 3D printer filament
24,99 USD
0.00032093BTC
Raktáron