G.SKILL F3-12800CL9S-4GBXL 4GB DDR3 1600 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
G.SKILL
A 16 GB quad-channel DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders for Intel LGA1155/LGA1156 and AMD AM3 platforms
Capacity 16GB (4 x 4GB)
This G.SKILL Ripjaws X Series kit delivers 16 GB of DDR3 1600 memory across four 4 GB modules. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano and AM3+ platforms that benefit from quad-channel bandwidth. The CL9 9-9-9-24 timings provide low-latency response for daily workloads and gaming.
Each module carries a red heat spreader that moves heat away from the DRAM to keep temperatures in check during sustained loads. The kit runs at a standard 1.50 V, so power draw stays modest and compatibility with a wide range of motherboards is straightforward. No active cooling is required for normal use.
Intel XMP support lets the firmware apply the rated 1600 MHz speed and CL9 timings automatically on 1st, 2nd and 3rd Generation Intel Core processors. The quad-channel layout removes the need for manual frequency or voltage tuning in most cases. Every module is 100 % tested to ensure stability out of the box.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL9Q-16GBXL |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Szállítási súly | 0.20 kg |
| Csomagméret | 216 × 137 × 22 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The kit is validated for Intel LGA1155 and LGA1156 platforms and uses DDR3 1600 modules running at 1.50 V with XMP profiles for 1st to 3rd Generation Intel Core processors.
Mixing kits is possible only if speed, timing 9-9-9-24, voltage 1.50 V and CAS latency CL9 match exactly; otherwise the system will default to the slowest common settings.
The Ripjaws X Series heat spreader is designed for low-profile clearance, but you should verify your cooler’s DIMM gap against the module height before ordering.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?