G.SKILL F3-12800CL9S-4GBXL 4GB DDR3 1600 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
G.SKILL
A 16 GB quad-channel DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders for Intel LGA1155/LGA1156 and AMD AM3 platforms
Capacity 16GB (4 x 4GB)
This G.SKILL Ripjaws X Series kit delivers 16 GB of DDR3 1600 memory across four 4 GB modules. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano and AM3+ platforms that benefit from quad-channel bandwidth. The CL9 9-9-9-24 timings provide low-latency response for daily workloads and gaming.
Each module carries a red heat spreader that moves heat away from the DRAM to keep temperatures in check during sustained loads. The kit runs at a standard 1.50 V, so power draw stays modest and compatibility with a wide range of motherboards is straightforward. No active cooling is required for normal use.
Intel XMP support lets the firmware apply the rated 1600 MHz speed and CL9 timings automatically on 1st, 2nd and 3rd Generation Intel Core processors. The quad-channel layout removes the need for manual frequency or voltage tuning in most cases. Every module is 100 % tested to ensure stability out of the box.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL9Q-16GBXL |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Prepravná hmotnosť | 0.20 kg |
| Rozmery balenia | 216 × 137 × 22 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The kit is validated for Intel LGA1155 and LGA1156 platforms and uses DDR3 1600 modules running at 1.50 V with XMP profiles for 1st to 3rd Generation Intel Core processors.
Mixing kits is possible only if speed, timing 9-9-9-24, voltage 1.50 V and CAS latency CL9 match exactly; otherwise the system will default to the slowest common settings.
The Ripjaws X Series heat spreader is designed for low-profile clearance, but you should verify your cooler’s DIMM gap against the module height before ordering.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?