G.SKILL F3-12800CL9S-4GBXL 4GB DDR3 1600 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
G.SKILL
A 16 GB quad-channel DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders for Intel LGA1155/LGA1156 and AMD AM3 platforms
Capacity 16GB (4 x 4GB)
This G.SKILL Ripjaws X Series kit delivers 16 GB of DDR3 1600 memory across four 4 GB modules. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano and AM3+ platforms that benefit from quad-channel bandwidth. The CL9 9-9-9-24 timings provide low-latency response for daily workloads and gaming.
Each module carries a red heat spreader that moves heat away from the DRAM to keep temperatures in check during sustained loads. The kit runs at a standard 1.50 V, so power draw stays modest and compatibility with a wide range of motherboards is straightforward. No active cooling is required for normal use.
Intel XMP support lets the firmware apply the rated 1600 MHz speed and CL9 timings automatically on 1st, 2nd and 3rd Generation Intel Core processors. The quad-channel layout removes the need for manual frequency or voltage tuning in most cases. Every module is 100 % tested to ensure stability out of the box.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL9Q-16GBXL |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Shipping weight | 0.20 kg |
| Package size | 216 × 137 × 22 mm |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The kit is validated for Intel LGA1155 and LGA1156 platforms and uses DDR3 1600 modules running at 1.50 V with XMP profiles for 1st to 3rd Generation Intel Core processors.
Mixing kits is possible only if speed, timing 9-9-9-24, voltage 1.50 V and CAS latency CL9 match exactly; otherwise the system will default to the slowest common settings.
The Ripjaws X Series heat spreader is designed for low-profile clearance, but you should verify your cooler’s DIMM gap against the module height before ordering.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?