G.SKILL F3-12800CL9S-4GBXL 4GB DDR3 1600 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
A 16 GB quad-channel DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders for Intel LGA1155/LGA1156 and AMD AM3 platforms
Capacity 16GB (4 x 4GB)
This G.SKILL Ripjaws X Series kit delivers 16 GB of DDR3 1600 memory across four 4 GB modules. It is built for Intel LGA1155, LGA1156 and AMD AM3, Llano and AM3+ platforms that benefit from quad-channel bandwidth. The CL9 9-9-9-24 timings provide low-latency response for daily workloads and gaming.
Each module carries a red heat spreader that moves heat away from the DRAM to keep temperatures in check during sustained loads. The kit runs at a standard 1.50 V, so power draw stays modest and compatibility with a wide range of motherboards is straightforward. No active cooling is required for normal use.
Intel XMP support lets the firmware apply the rated 1600 MHz speed and CL9 timings automatically on 1st, 2nd and 3rd Generation Intel Core processors. The quad-channel layout removes the need for manual frequency or voltage tuning in most cases. Every module is 100 % tested to ensure stability out of the box.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws X Series |
| Model | F3-12800CL9Q-16GBXL |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Red |
| Heat Spreader | Yes |
| Features | Compatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors |
| Lähetyspaino | 0.20 kg |
| Pakkauksen mitat | 216 × 137 × 22 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit is validated for Intel LGA1155 and LGA1156 platforms and uses DDR3 1600 modules running at 1.50 V with XMP profiles for 1st to 3rd Generation Intel Core processors.
Mixing kits is possible only if speed, timing 9-9-9-24, voltage 1.50 V and CAS latency CL9 match exactly; otherwise the system will default to the slowest common settings.
The Ripjaws X Series heat spreader is designed for low-profile clearance, but you should verify your cooler’s DIMM gap against the module height before ordering.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?