Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two red DDR3 memory modules with finned heat spreaders

G.SKILL

G.SKILL F3-12800CL9D-4GBXL 4GB (2×2GB) DDR3 1600 desktop RAM

SKU CH-VMFB-HBHH8 MPN F3-12800CL9D-4GBXL

Dual-channel 4 GB DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders

  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL9
  • Timing9-9-9-24
  • Voltage1.50V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth for responsive multitasking
  • CL9 9-9-9-24 timing delivers low-latency performance at DDR3 1600
  • 50 V operation reduces heat and improves platform compatibility
  • Red Ripjaws X heat spreader keeps modules cool under load
  • Intel XMP support enables one-click overclocking on compatible Core platforms

Ripjaws X Dual-Channel Kit

This G.SKILL Ripjaws X Series kit provides 4GB of DDR3 desktop memory in a matched 2 x 2GB configuration. It is built for dual-channel platforms and targets users upgrading or maintaining systems based on Intel LGA1155, LGA1156 or AMD AM3, Llano and AM3+ sockets. The modules run at 1600MHz with CL9 9-9-9-24 timings.

Build Integration and Compatibility

The unbuffered, non-ECC DIMMs install directly into standard DDR3 slots without registration overhead. Intel XMP profiles simplify setup on 1st, 2nd and 3rd Generation Intel Core processors. Red heat spreaders sit on each module, leaving the top clear for most CPU cooler arrangements. Dual-channel architecture doubles bandwidth across the memory controller.

Thermals, Noise and Power Draw

Each module operates at a rated 1.50V, reducing electrical load compared to higher-voltage DDR3 kits. The integrated heat spreader dissipates thermal energy passively, adding no moving parts or acoustic signature. Modules are 100% tested for stability at the rated 1600MHz speed. Power consumption scales with the low 1.5V operating point.

Kohokohdat

  • Dual-channel kit doubles bandwidth for responsive multitasking
  • CL9 9-9-9-24 timing delivers low-latency performance at DDR3 1600
  • 50 V operation reduces heat and improves platform compatibility
  • Red Ripjaws X heat spreader keeps modules cool under load
  • Intel XMP support enables one-click overclocking on compatible Core platforms

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws X Series
ModelF3-12800CL9D-4GBXL
Capacity4GB (2 x 2GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL9
Timing9-9-9-24
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorRed
FeaturesCompatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors
Lähetyspaino0.11 kg
Pakkauksen mitat204 × 137 × 17 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 2×2 GB DDR3 1600 kit run in dual-channel on an Intel LGA1155 motherboard?

Yes, the kit is a matched dual-channel pair tested for Intel LGA1155 and LGA1156 platforms at 1600 MHz with CL9 timing.

Does the 1.50 V operating voltage need a BIOS change on a standard desktop board?

No, 1.50 V is the standard DDR3 voltage so the modules will boot at rated speed without a voltage adjustment.

What does the 9-9-9-24 timing mean for real-world responsiveness?

The CL9 primary latency and 24-cycle tRAS give low access delay at 1600 MHz, keeping everyday tasks and gaming smooth.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.