暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two red DDR3 memory modules with finned heat spreaders

G.SKILL

G.SKILL F3-12800CL9D-4GBXL 4GB (2×2GB) DDR3 1600 desktop RAM

SKU CH-VMFB-HBHH8 MPN F3-12800CL9D-4GBXL

Dual-channel 4 GB DDR3 1600 kit with CL9 timing, 1.50 V operation and red heat spreaders

  • Capacity4GB (2 x 2GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL9
  • Timing9-9-9-24
  • Voltage1.50V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel kit doubles bandwidth for responsive multitasking
  • CL9 9-9-9-24 timing delivers low-latency performance at DDR3 1600
  • 50 V operation reduces heat and improves platform compatibility
  • Red Ripjaws X heat spreader keeps modules cool under load
  • Intel XMP support enables one-click overclocking on compatible Core platforms

Ripjaws X Dual-Channel Kit

This G.SKILL Ripjaws X Series kit provides 4GB of DDR3 desktop memory in a matched 2 x 2GB configuration. It is built for dual-channel platforms and targets users upgrading or maintaining systems based on Intel LGA1155, LGA1156 or AMD AM3, Llano and AM3+ sockets. The modules run at 1600MHz with CL9 9-9-9-24 timings.

Build Integration and Compatibility

The unbuffered, non-ECC DIMMs install directly into standard DDR3 slots without registration overhead. Intel XMP profiles simplify setup on 1st, 2nd and 3rd Generation Intel Core processors. Red heat spreaders sit on each module, leaving the top clear for most CPU cooler arrangements. Dual-channel architecture doubles bandwidth across the memory controller.

Thermals, Noise and Power Draw

Each module operates at a rated 1.50V, reducing electrical load compared to higher-voltage DDR3 kits. The integrated heat spreader dissipates thermal energy passively, adding no moving parts or acoustic signature. Modules are 100% tested for stability at the rated 1600MHz speed. Power consumption scales with the low 1.5V operating point.

特長

  • Dual-channel kit doubles bandwidth for responsive multitasking
  • CL9 9-9-9-24 timing delivers low-latency performance at DDR3 1600
  • 50 V operation reduces heat and improves platform compatibility
  • Red Ripjaws X heat spreader keeps modules cool under load
  • Intel XMP support enables one-click overclocking on compatible Core platforms

仕様

BrandG.SKILL
SeriesRipjaws X Series
ModelF3-12800CL9D-4GBXL
Capacity4GB (2 x 2GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL9
Timing9-9-9-24
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorRed
FeaturesCompatible with Intel LGA1155/LGA1156 and AMD AM3/Llano/AM3+ platforms
Intel XMP support for 1st, 2nd and 3rd Generation Intel Core Processors
配送重量0.11 kg
梱包サイズ204 × 137 × 17 mm

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 2×2 GB DDR3 1600 kit run in dual-channel on an Intel LGA1155 motherboard?

Yes, the kit is a matched dual-channel pair tested for Intel LGA1155 and LGA1156 platforms at 1600 MHz with CL9 timing.

Does the 1.50 V operating voltage need a BIOS change on a standard desktop board?

No, 1.50 V is the standard DDR3 voltage so the modules will boot at rated speed without a voltage adjustment.

What does the 9-9-9-24 timing mean for real-world responsiveness?

The CL9 primary latency and 24-cycle tRAS give low access delay at 1600 MHz, keeping everyday tasks and gaming smooth.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。