Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Compact ST-Link V2 programmer board with aluminium housing and 20 cm DuPont cable

MCDODO

MCDODO ST-Link V2 Programmer STM32F103C8T6 STM8 with Cable Random Color

SKU CH-K2T5-5K0GR

Programs STM32 and STM8 microcontrollers via SWD and SWIM with a 20 cm cable and 2.54 mm pitch header

  • TypeSingle Board Computers
  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

ST-Link V2 for STM32 and STM8

The MCDODO ST-Link V2 is a compact programmer and debugger for STM32F103C8T6 and STM8 microcontrollers. It connects via a 20 cm DuPont cable with 2.54 mm pitch headers for direct board attachment. The aluminium housing labels each pin including RST, SWDIO, SWIM, SWCLK, 3.3 V and 5.0 V supplies. Developers targeting Cortex-M or STM8 cores can use it with IAR, STVD and other common toolchains.

Sustained debugging and firmware updates

The device supports the full SWD interface for STM32 and SWIM for STM8 across extended sessions. Automatic firmware upgrades keep the probe compatible with new device families without manual intervention. Protected I/O ports and a dedicated 5 V output reduce the risk of damage from wiring mistakes during long development cycles. The simple four-wire connection remains stable for continuous flash programming and real-time trace.

Thermals, noise and power in normal use

The aluminium enclosure passively dissipates heat from the onboard STM32F103C8T6 during typical debug loads. No active cooling is present so operation is silent. Power is drawn from the host USB port and the probe supplies both 3.3 V and 5.0 V rails to the target within their rated limits. The protected outputs prevent excess current from stressing the programmer or the attached board.

Erősségek

  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

Műszaki adatok

TypeSingle Board Computers

Kérdések a termékről

How much heat or power draw should I expect from the ST-Link V2 when it runs all day?

The programmer draws power from the USB host and supplies up to 5.0 V on its output pins; typical current is low because it only drives the target MCU and a few protection circuits.

What host connection and cables do I need before this programmer will work?

Plug the board into a USB port on your PC; the package includes a 20 cm DuPont-line cable with 2.54 mm pitch connectors for the target.

Will the ST-Link V2 program older STM8 and STM32 chips I already have?

Yes — it supports the full STM8 range via SWIM and the full STM32 range via SWD, including the STM32F103C8T6 Cortex-M3 core.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.