我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Compact ST-Link V2 programmer board with aluminium housing and 20 cm DuPont cable

MCDODO

MCDODO ST-Link V2 Programmer STM32F103C8T6 STM8 with Cable Random Color

SKU CH-K2T5-5K0GR

Programs STM32 and STM8 microcontrollers via SWD and SWIM with a 20 cm cable and 2.54 mm pitch header

  • TypeSingle Board Computers
  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

ST-Link V2 for STM32 and STM8

The MCDODO ST-Link V2 is a compact programmer and debugger for STM32F103C8T6 and STM8 microcontrollers. It connects via a 20 cm DuPont cable with 2.54 mm pitch headers for direct board attachment. The aluminium housing labels each pin including RST, SWDIO, SWIM, SWCLK, 3.3 V and 5.0 V supplies. Developers targeting Cortex-M or STM8 cores can use it with IAR, STVD and other common toolchains.

Sustained debugging and firmware updates

The device supports the full SWD interface for STM32 and SWIM for STM8 across extended sessions. Automatic firmware upgrades keep the probe compatible with new device families without manual intervention. Protected I/O ports and a dedicated 5 V output reduce the risk of damage from wiring mistakes during long development cycles. The simple four-wire connection remains stable for continuous flash programming and real-time trace.

Thermals, noise and power in normal use

The aluminium enclosure passively dissipates heat from the onboard STM32F103C8T6 during typical debug loads. No active cooling is present so operation is silent. Power is drawn from the host USB port and the probe supplies both 3.3 V and 5.0 V rails to the target within their rated limits. The protected outputs prevent excess current from stressing the programmer or the attached board.

商品特色

  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

商品規格

TypeSingle Board Computers

商品問答

How much heat or power draw should I expect from the ST-Link V2 when it runs all day?

The programmer draws power from the USB host and supplies up to 5.0 V on its output pins; typical current is low because it only drives the target MCU and a few protection circuits.

What host connection and cables do I need before this programmer will work?

Plug the board into a USB port on your PC; the package includes a 20 cm DuPont-line cable with 2.54 mm pitch connectors for the target.

Will the ST-Link V2 program older STM8 and STM32 chips I already have?

Yes — it supports the full STM8 range via SWIM and the full STM32 range via SWD, including the STM32F103C8T6 Cortex-M3 core.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。