Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Compact ST-Link V2 programmer board with aluminium housing and 20 cm DuPont cable

MCDODO

MCDODO ST-Link V2 Programmer STM32F103C8T6 STM8 with Cable Random Color

SKU CH-K2T5-5K0GR

Programs STM32 and STM8 microcontrollers via SWD and SWIM with a 20 cm cable and 2.54 mm pitch header

  • TypeSingle Board Computers
  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

ST-Link V2 for STM32 and STM8

The MCDODO ST-Link V2 is a compact programmer and debugger for STM32F103C8T6 and STM8 microcontrollers. It connects via a 20 cm DuPont cable with 2.54 mm pitch headers for direct board attachment. The aluminium housing labels each pin including RST, SWDIO, SWIM, SWCLK, 3.3 V and 5.0 V supplies. Developers targeting Cortex-M or STM8 cores can use it with IAR, STVD and other common toolchains.

Sustained debugging and firmware updates

The device supports the full SWD interface for STM32 and SWIM for STM8 across extended sessions. Automatic firmware upgrades keep the probe compatible with new device families without manual intervention. Protected I/O ports and a dedicated 5 V output reduce the risk of damage from wiring mistakes during long development cycles. The simple four-wire connection remains stable for continuous flash programming and real-time trace.

Thermals, noise and power in normal use

The aluminium enclosure passively dissipates heat from the onboard STM32F103C8T6 during typical debug loads. No active cooling is present so operation is silent. Power is drawn from the host USB port and the probe supplies both 3.3 V and 5.0 V rails to the target within their rated limits. The protected outputs prevent excess current from stressing the programmer or the attached board.

Ciri-ciri utama

  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

Spesifikasi

TypeSingle Board Computers

Soalan tentang produk ini

How much heat or power draw should I expect from the ST-Link V2 when it runs all day?

The programmer draws power from the USB host and supplies up to 5.0 V on its output pins; typical current is low because it only drives the target MCU and a few protection circuits.

What host connection and cables do I need before this programmer will work?

Plug the board into a USB port on your PC; the package includes a 20 cm DuPont-line cable with 2.54 mm pitch connectors for the target.

Will the ST-Link V2 program older STM8 and STM32 chips I already have?

Yes — it supports the full STM8 range via SWIM and the full STM32 range via SWD, including the STM32F103C8T6 Cortex-M3 core.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.