Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Compact ST-Link V2 programmer board with aluminium housing and 20 cm DuPont cable

MCDODO

MCDODO ST-Link V2 Programmer STM32F103C8T6 STM8 with Cable Random Color

SKU CH-K2T5-5K0GR

Programs STM32 and STM8 microcontrollers via SWD and SWIM with a 20 cm cable and 2.54 mm pitch header

  • TypeSingle Board Computers
  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

ST-Link V2 for STM32 and STM8

The MCDODO ST-Link V2 is a compact programmer and debugger for STM32F103C8T6 and STM8 microcontrollers. It connects via a 20 cm DuPont cable with 2.54 mm pitch headers for direct board attachment. The aluminium housing labels each pin including RST, SWDIO, SWIM, SWCLK, 3.3 V and 5.0 V supplies. Developers targeting Cortex-M or STM8 cores can use it with IAR, STVD and other common toolchains.

Sustained debugging and firmware updates

The device supports the full SWD interface for STM32 and SWIM for STM8 across extended sessions. Automatic firmware upgrades keep the probe compatible with new device families without manual intervention. Protected I/O ports and a dedicated 5 V output reduce the risk of damage from wiring mistakes during long development cycles. The simple four-wire connection remains stable for continuous flash programming and real-time trace.

Thermals, noise and power in normal use

The aluminium enclosure passively dissipates heat from the onboard STM32F103C8T6 during typical debug loads. No active cooling is present so operation is silent. Power is drawn from the host USB port and the probe supplies both 3.3 V and 5.0 V rails to the target within their rated limits. The protected outputs prevent excess current from stressing the programmer or the attached board.

Puncte forte

  • Program and debug STM32 via SWD with automatic firmware upgrades
  • Program and debug STM8 via SWIM for common development environments
  • 5 V power output and protected I/O ports reduce risk of damage
  • 54 mm pitch header with 20 cm DuPont cable enables flexible wiring
  • Aluminium housing with marked pinout simplifies connection

Specificații

TypeSingle Board Computers

Întrebări despre acest articol

How much heat or power draw should I expect from the ST-Link V2 when it runs all day?

The programmer draws power from the USB host and supplies up to 5.0 V on its output pins; typical current is low because it only drives the target MCU and a few protection circuits.

What host connection and cables do I need before this programmer will work?

Plug the board into a USB port on your PC; the package includes a 20 cm DuPont-line cable with 2.54 mm pitch connectors for the target.

Will the ST-Link V2 program older STM8 and STM32 chips I already have?

Yes — it supports the full STM8 range via SWIM and the full STM32 range via SWD, including the STM32F103C8T6 Cortex-M3 core.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.