Phanteks PH-F140M25_G2_BBK01 140mm 25mm PWM case fan
- 1 Fan
- No Controller
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Phanteks
A 120 mm white ARGB case fan with reversed blades, 73.69 CFM airflow and daisy-chain Linq6 cabling for clean builds
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Single Fan
Az áthúzott konfigurációk léteznek, de nem érhetők el itt.
The Phanteks M25 Gen2 Reversed is a single 120 mm fan built for builders who want clean cable routing and addressable lighting. Its white matte blades and frame suit light-themed builds, while the Linq6 connector merges PWM control and D-RGB signals into one 500 mm cable. Screw covers in corner and bridge styles complete the tidy appearance.
The reversed blade profile pushes 73.69 CFM at 1.99 mmH₂O static pressure, spinning from 350 to 2000 RPM with a hydraulic bearing. At maximum speed the fan reaches 39.28 dBA, so sustained loads on dense fins stay cool without excessive noise. The unified frame locks multiple units together, keeping alignment and airflow consistent across a full radiator stack.
This fan replaces basic PWM models that need separate RGB headers and individual cables. The jump is worth it when you are populating a radiator or case side panel with several fans and want one daisy-chained run to the motherboard or a NexLinq hub. Builders who need only one fan or who lack a 5 V addressable header will not benefit from the Linq6 ecosystem.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 1x Fan Screws: 5x 500mm Linq6 Extension Cable: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 2x Installation Guide: 1x |
| Szállítási súly | 0.23 kg |
| Csomagméret | 137 × 127 × 51 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
At the maximum 2000 RPM the fan produces 39.28 dBA and moves 73.69 CFM with 1.99 mmH₂O static pressure, drawing power through a standard PWM 4-pin connector.
A single 4-pin PWM header supplies both fan control and D-RGB signal; the included 500 mm Linq6 extension cable lets you chain additional fans without extra headers.
The 120 × 120 × 25 mm dimensions match standard 120 mm mounts, and the reversed-blade design is made for radiators and heatsinks, so it aligns with existing cooling hardware.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?