Phanteks PH-F140M25_G2_BBK01 140mm 25mm PWM case fan
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Phanteks
A 120 mm white ARGB case fan with reversed blades, 73.69 CFM airflow and daisy-chain Linq6 cabling for clean builds
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Single Fan
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Phanteks M25 Gen2 Reversed is a single 120 mm fan built for builders who want clean cable routing and addressable lighting. Its white matte blades and frame suit light-themed builds, while the Linq6 connector merges PWM control and D-RGB signals into one 500 mm cable. Screw covers in corner and bridge styles complete the tidy appearance.
The reversed blade profile pushes 73.69 CFM at 1.99 mmH₂O static pressure, spinning from 350 to 2000 RPM with a hydraulic bearing. At maximum speed the fan reaches 39.28 dBA, so sustained loads on dense fins stay cool without excessive noise. The unified frame locks multiple units together, keeping alignment and airflow consistent across a full radiator stack.
This fan replaces basic PWM models that need separate RGB headers and individual cables. The jump is worth it when you are populating a radiator or case side panel with several fans and want one daisy-chained run to the motherboard or a NexLinq hub. Builders who need only one fan or who lack a 5 V addressable header will not benefit from the Linq6 ecosystem.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 1x Fan Screws: 5x 500mm Linq6 Extension Cable: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 2x Installation Guide: 1x |
| Lähetyspaino | 0.23 kg |
| Pakkauksen mitat | 137 × 127 × 51 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
At the maximum 2000 RPM the fan produces 39.28 dBA and moves 73.69 CFM with 1.99 mmH₂O static pressure, drawing power through a standard PWM 4-pin connector.
A single 4-pin PWM header supplies both fan control and D-RGB signal; the included 500 mm Linq6 extension cable lets you chain additional fans without extra headers.
The 120 × 120 × 25 mm dimensions match standard 120 mm mounts, and the reversed-blade design is made for radiators and heatsinks, so it aligns with existing cooling hardware.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?