Phanteks PH-F140M25_G2_BBK01 140mm 25mm PWM case fan
- 1 Fan
- No Controller
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Phanteks
A 120 mm white ARGB case fan with reversed blades, 73.69 CFM airflow and daisy-chain Linq6 cabling for clean builds
Fan Size 120mm
Style Reversed
Model M25 Gen2
Option Single Fan
Preškrtnuté verzie existujú, ale nie sú tu skladom.
The Phanteks M25 Gen2 Reversed is a single 120 mm fan built for builders who want clean cable routing and addressable lighting. Its white matte blades and frame suit light-themed builds, while the Linq6 connector merges PWM control and D-RGB signals into one 500 mm cable. Screw covers in corner and bridge styles complete the tidy appearance.
The reversed blade profile pushes 73.69 CFM at 1.99 mmH₂O static pressure, spinning from 350 to 2000 RPM with a hydraulic bearing. At maximum speed the fan reaches 39.28 dBA, so sustained loads on dense fins stay cool without excessive noise. The unified frame locks multiple units together, keeping alignment and airflow consistent across a full radiator stack.
This fan replaces basic PWM models that need separate RGB headers and individual cables. The jump is worth it when you are populating a radiator or case side panel with several fans and want one daisy-chained run to the motherboard or a NexLinq hub. Builders who need only one fan or who lack a 5 V addressable header will not benefit from the Linq6 ecosystem.
| Brand | Phanteks |
|---|---|
| Model | M25-120 Gen2 Reversed |
| Part Number | PH-F120M25R_G2_DWT01 |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 350-2000 +/- 10% RPM Max |
| Air Flow | 73.69 CFM Max |
| Air Pressure | 1.99 mmH2O Max |
| Noise Level | 39.28 dBA Max |
| Power Connector | PWM, 2-Fase/4-poles |
| Color | White Matte Blade / White Fan Frame |
| LED | DRGB |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | M25-120 Gen2 Reversed Fan: 1x Fan Screws: 5x 500mm Linq6 Extension Cable: 1x Screw Cover Corner: 4x (2xL, 2xR) Screw Cover Bridge: 2x Installation Guide: 1x |
| Prepravná hmotnosť | 0.23 kg |
| Rozmery balenia | 137 × 127 × 51 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
At the maximum 2000 RPM the fan produces 39.28 dBA and moves 73.69 CFM with 1.99 mmH₂O static pressure, drawing power through a standard PWM 4-pin connector.
A single 4-pin PWM header supplies both fan control and D-RGB signal; the included 500 mm Linq6 extension cable lets you chain additional fans without extra headers.
The 120 × 120 × 25 mm dimensions match standard 120 mm mounts, and the reversed-blade design is made for radiators and heatsinks, so it aligns with existing cooling hardware.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?