NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Replace Power
420W ATX power supply with SATA and dual ATX connectors for Compaq Presario desktops
The Replace Power RPSU-C99-41 is a 420W ATX unit built to match the original power module in Compaq Presario SR2013WM, SR2014HM, SR2015LA, SR2017CL and SR2017LA desktops. It delivers the exact wattage and form factor required by those systems. Builders working on other platforms or needing higher output should look elsewhere.
The grey chassis holds a single fan and supplies a fixed harness: one 15-inch SATA connector, one 14-inch ATX connector compatible with both 20-pin and 24-pin motherboards, one 14-inch 12V ATX connector, two 15-inch large power connectors, two 6-inch large power connectors and one 6-inch small power connector. Cable lengths are set, so routing space inside the case must accommodate the listed reaches.
Rated at 420W, the supply uses one fan to move air through the grey enclosure under normal load. Acoustic output and thermal behaviour follow the single-fan design at this wattage level. No modular cabling or alternative cooling modes are provided.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-41 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies one 15-inch SATA connector, one 14-inch ATX connector supporting both 20-pin and 24-pin layouts, one 14-inch 12V ATX connector, two 15-inch large power connectors, two 6-inch large power connectors and one 6-inch small power connector.
The unit follows the standard ATX form factor and is listed as a direct replacement for the SR2013WM, SR2014HM, SR2015LA, SR2017CL and SR2017LA models, so it mounts in the same bay with the same screw pattern.
Fit the unit into the case and secure the screws, then plug the 14-inch ATX connector into the motherboard (20-pin or 24-pin), attach the 14-inch 12V ATX cable, connect the SATA lead to drives, and finally add the large and small peripheral connectors as needed.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?