NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Replace Power
420W ATX power supply with SATA and dual ATX connectors for Compaq Presario desktops
The Replace Power RPSU-C99-41 is a 420W ATX unit built to match the original power module in Compaq Presario SR2013WM, SR2014HM, SR2015LA, SR2017CL and SR2017LA desktops. It delivers the exact wattage and form factor required by those systems. Builders working on other platforms or needing higher output should look elsewhere.
The grey chassis holds a single fan and supplies a fixed harness: one 15-inch SATA connector, one 14-inch ATX connector compatible with both 20-pin and 24-pin motherboards, one 14-inch 12V ATX connector, two 15-inch large power connectors, two 6-inch large power connectors and one 6-inch small power connector. Cable lengths are set, so routing space inside the case must accommodate the listed reaches.
Rated at 420W, the supply uses one fan to move air through the grey enclosure under normal load. Acoustic output and thermal behaviour follow the single-fan design at this wattage level. No modular cabling or alternative cooling modes are provided.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-41 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies one 15-inch SATA connector, one 14-inch ATX connector supporting both 20-pin and 24-pin layouts, one 14-inch 12V ATX connector, two 15-inch large power connectors, two 6-inch large power connectors and one 6-inch small power connector.
The unit follows the standard ATX form factor and is listed as a direct replacement for the SR2013WM, SR2014HM, SR2015LA, SR2017CL and SR2017LA models, so it mounts in the same bay with the same screw pattern.
Fit the unit into the case and secure the screws, then plug the 14-inch ATX connector into the motherboard (20-pin or 24-pin), attach the 14-inch 12V ATX cable, connect the SATA lead to drives, and finally add the large and small peripheral connectors as needed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?