Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

A-Tech

A-Tech 16GB DDR4 2400MHz PC4-19200 DIMM 288-Pin desktop RAM

SKU CH-T48Z-P0RYJ

A 16GB DDR4 2400MHz desktop memory module with 288-pin DIMM form factor and 1.2V operation for compatible AMD and Intel systems

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity lets you run more applications at once
  • DDR4 2400 MHz speed delivers fast data transfer rates
  • 2 V operation reduces power consumption and heat
  • 288-pin DIMM form factor fits standard desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer systems

16GB DDR4 2400MHz desktop module

This single 16GB DIMM adds capacity to a desktop system using standard 288-pin DDR4 slots. It runs at 2400MHz with a 1.20V operating voltage and is an unbuffered, non-ECC module. The stick is built as a direct replacement for Micron part numbers MTA16ATF2G64AZ-2G3, MTA16ATF2G64AZ-2G3A1 and MTA16ATF2G64AZ-2G3B1.

Replaces slower DDR4 or smaller modules

Swapping out a lower-frequency DDR4 stick or a smaller capacity module lets the memory controller run at the rated 2400MHz PC4-19200 data rate. The upgrade is worthwhile when the platform supports this speed and the extra 16GB removes a bottleneck in multitasking or larger workloads. Systems already populated with matching 2400MHz modules will not see a frequency gain from this addition.

Fits standard 288-pin DDR4 motherboard slots

The module requires a desktop board with DDR4 DIMM sockets and a memory controller able to address 16GB per slot at 1.20V. It occupies one slot, leaving remaining banks free for further expansion up to the board's supported maximum. Buyers needing ECC error correction or registered buffering must choose a different module type.

Helstu kostir

  • 16 GB capacity lets you run more applications at once
  • DDR4 2400 MHz speed delivers fast data transfer rates
  • 2 V operation reduces power consumption and heat
  • 288-pin DIMM form factor fits standard desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer systems

Tæknilýsing

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Spurningar um þessa vöru

Will this 288-pin DDR4 DIMM fit my desktop motherboard's memory slots?

The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any desktop board with DDR4 slots. Verify your system supports DDR4 2400 before buying.

What is the correct way to seat this 16GB DDR4 2400MHz module, and what step do people often miss?

Align the notch with the slot key, press straight down until both side clips click, and confirm the module sits flat. The step many miss is pushing firmly enough for both clips to engage fully.

Does this 1.2V DDR4 2400MHz RAM need any firmware updates or component replacements over time?

No firmware or replaceable parts are involved. The module runs at standard 1.2V; keep the system's air vents clear so the memory stays cool and stable for its service life.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.