Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

A-Tech

A-Tech 16GB DDR4 2400MHz PC4-19200 DIMM 288-Pin desktop RAM

SKU CH-T48Z-P0RYJ

A 16GB DDR4 2400MHz desktop memory module with 288-pin DIMM form factor and 1.2V operation for compatible AMD and Intel systems

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity lets you run more applications at once
  • DDR4 2400 MHz speed delivers fast data transfer rates
  • 2 V operation reduces power consumption and heat
  • 288-pin DIMM form factor fits standard desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer systems

16GB DDR4 2400MHz desktop module

This single 16GB DIMM adds capacity to a desktop system using standard 288-pin DDR4 slots. It runs at 2400MHz with a 1.20V operating voltage and is an unbuffered, non-ECC module. The stick is built as a direct replacement for Micron part numbers MTA16ATF2G64AZ-2G3, MTA16ATF2G64AZ-2G3A1 and MTA16ATF2G64AZ-2G3B1.

Replaces slower DDR4 or smaller modules

Swapping out a lower-frequency DDR4 stick or a smaller capacity module lets the memory controller run at the rated 2400MHz PC4-19200 data rate. The upgrade is worthwhile when the platform supports this speed and the extra 16GB removes a bottleneck in multitasking or larger workloads. Systems already populated with matching 2400MHz modules will not see a frequency gain from this addition.

Fits standard 288-pin DDR4 motherboard slots

The module requires a desktop board with DDR4 DIMM sockets and a memory controller able to address 16GB per slot at 1.20V. It occupies one slot, leaving remaining banks free for further expansion up to the board's supported maximum. Buyers needing ECC error correction or registered buffering must choose a different module type.

Points forts

  • 16 GB capacity lets you run more applications at once
  • DDR4 2400 MHz speed delivers fast data transfer rates
  • 2 V operation reduces power consumption and heat
  • 288-pin DIMM form factor fits standard desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer systems

Caractéristiques

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions sur cet article

Will this 288-pin DDR4 DIMM fit my desktop motherboard's memory slots?

The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any desktop board with DDR4 slots. Verify your system supports DDR4 2400 before buying.

What is the correct way to seat this 16GB DDR4 2400MHz module, and what step do people often miss?

Align the notch with the slot key, press straight down until both side clips click, and confirm the module sits flat. The step many miss is pushing firmly enough for both clips to engage fully.

Does this 1.2V DDR4 2400MHz RAM need any firmware updates or component replacements over time?

No firmware or replaceable parts are involved. The module runs at standard 1.2V; keep the system's air vents clear so the memory stays cool and stable for its service life.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.