Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips and gold edge connectors on a 240-pin DDR2 desktop memory module

A-Tech

A-Tech 2GB DDR2 667MHz PC2-5300 UDIMM CL5 1.8V 240-Pin Desktop RAM

SKU CH-845Z-J3VSV

A 2GB DDR2 667MHz desktop memory module with 240-pin UDIMM form factor, CL5 latency and 1.8V operation

  • Capacity2GB
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB

Speed DDR2 667 (PC2 5300)

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

A-Tech 2GB DDR2 667MHz UDIMM

This module provides 2GB of DDR2 memory rated at 667MHz (PC2-5300) with standard 1.8V operation. It uses an unbuffered, non-ECC 240-pin DIMM form factor designed for desktop computers. The kit contains a single stick suitable for AMD and Intel platforms that accept this specification.

Check motherboard DDR2 slot

Before ordering, confirm the motherboard has an available 240-pin DDR2 DIMM slot and officially supports 667MHz modules at 1.8V. Verify the board’s maximum memory capacity per slot and total system limit using the manual or vendor documentation. Ensure the BIOS is updated if required for full compatibility with this density.

Suits legacy DDR2 desktops needing a single 2GB

This upgrade suits older desktop PCs that require DDR2 667MHz memory and have a free 240-pin slot for a 2GB module. Systems needing ECC, registered, or lower-voltage DDR2 should look elsewhere. Machines already at their memory ceiling or using a different DDR generation will not accept this module.

Helstu kostir

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this module fit a desktop that requires DDR2 667MHz PC2-5300 UDIMM memory?

Yes, the module is a 240-pin DDR2 DIMM rated at 667MHz with PC2-5300 speed and 1.8V operation, matching those specifications.

Is this memory compatible with systems that only accept ECC or registered modules?

No, this is a non-ECC unbuffered UDIMM, so it will not work in motherboards that require ECC or registered memory.

Can I add this 2GB stick alongside existing DDR2 modules running at a different speed?

The module will run at the speed of the slowest installed memory, so mixing speeds is possible but the system will operate at the lower frequency.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.