Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green printed circuit board with black memory chips and gold edge connectors on a 240-pin DDR2 desktop memory module

A-Tech

A-Tech 2GB DDR2 667MHz PC2-5300 UDIMM CL5 1.8V 240-Pin Desktop RAM

SKU CH-845Z-J3VSV

A 2GB DDR2 667MHz desktop memory module with 240-pin UDIMM form factor, CL5 latency and 1.8V operation

  • Capacity2GB
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB

Speed DDR2 667 (PC2 5300)

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

A-Tech 2GB DDR2 667MHz UDIMM

This module provides 2GB of DDR2 memory rated at 667MHz (PC2-5300) with standard 1.8V operation. It uses an unbuffered, non-ECC 240-pin DIMM form factor designed for desktop computers. The kit contains a single stick suitable for AMD and Intel platforms that accept this specification.

Check motherboard DDR2 slot

Before ordering, confirm the motherboard has an available 240-pin DDR2 DIMM slot and officially supports 667MHz modules at 1.8V. Verify the board’s maximum memory capacity per slot and total system limit using the manual or vendor documentation. Ensure the BIOS is updated if required for full compatibility with this density.

Suits legacy DDR2 desktops needing a single 2GB

This upgrade suits older desktop PCs that require DDR2 667MHz memory and have a free 240-pin slot for a 2GB module. Systems needing ECC, registered, or lower-voltage DDR2 should look elsewhere. Machines already at their memory ceiling or using a different DDR generation will not accept this module.

I korthet

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

Specifikationer

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this module fit a desktop that requires DDR2 667MHz PC2-5300 UDIMM memory?

Yes, the module is a 240-pin DDR2 DIMM rated at 667MHz with PC2-5300 speed and 1.8V operation, matching those specifications.

Is this memory compatible with systems that only accept ECC or registered modules?

No, this is a non-ECC unbuffered UDIMM, so it will not work in motherboards that require ECC or registered memory.

Can I add this 2GB stick alongside existing DDR2 modules running at a different speed?

The module will run at the speed of the slowest installed memory, so mixing speeds is possible but the system will operate at the lower frequency.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.