暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 2GB DDR2 667MHz PC2-5300 UDIMM CL5 1.8V 240-Pin Desktop RAM

SKU CH-845Z-J3VSV

A 2GB DDR2 667MHz desktop memory module with 240-pin UDIMM form factor, CL5 latency and 1.8V operation

  • Capacity2GB
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Speed DDR2 667 (PC2 5300)

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

A-Tech 2GB DDR2 667MHz UDIMM

This module provides 2GB of DDR2 memory rated at 667MHz (PC2-5300) with standard 1.8V operation. It uses an unbuffered, non-ECC 240-pin DIMM form factor designed for desktop computers. The kit contains a single stick suitable for AMD and Intel platforms that accept this specification.

Check motherboard DDR2 slot

Before ordering, confirm the motherboard has an available 240-pin DDR2 DIMM slot and officially supports 667MHz modules at 1.8V. Verify the board’s maximum memory capacity per slot and total system limit using the manual or vendor documentation. Ensure the BIOS is updated if required for full compatibility with this density.

Suits legacy DDR2 desktops needing a single 2GB

This upgrade suits older desktop PCs that require DDR2 667MHz memory and have a free 240-pin slot for a 2GB module. Systems needing ECC, registered, or lower-voltage DDR2 should look elsewhere. Machines already at their memory ceiling or using a different DDR generation will not accept this module.

特長

  • 2GB capacity expands multitasking headroom for older desktops
  • DDR2 667MHz speed matches PC2-5300 system requirements
  • 80V standard voltage ensures stable operation
  • 240-pin UDIMM form factor fits compatible motherboard slots
  • Non-ECC unbuffered design suits typical desktop workloads

仕様

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this module fit a desktop that requires DDR2 667MHz PC2-5300 UDIMM memory?

Yes, the module is a 240-pin DDR2 DIMM rated at 667MHz with PC2-5300 speed and 1.8V operation, matching those specifications.

Is this memory compatible with systems that only accept ECC or registered modules?

No, this is a non-ECC unbuffered UDIMM, so it will not work in motherboards that require ECC or registered memory.

Can I add this 2GB stick alongside existing DDR2 modules running at a different speed?

The module will run at the speed of the slowest installed memory, so mixing speeds is possible but the system will operate at the lower frequency.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。