暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR2 DIMM modules with gold 240-pin connectors

A-Tech

A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM

SKU CH-HTWB-CBJ91

A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

Speed DDR2 667 (PC2 5300)

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Kit Purpose

This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Build And Connections

Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.

Deciding Specification

The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.

特長

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

仕様

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What speed does the DDR2 667MHz DIMM run at in practice?

The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.

What physical slot does this 240-pin DIMM require?

It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.

How do I install the dual-channel kit and what step is often missed?

Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。