Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green DDR2 DIMM modules with gold 240-pin connectors

A-Tech

A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM

SKU CH-HTWB-CBJ91

A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

Speed DDR2 667 (PC2 5300)

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Kit Purpose

This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Build And Connections

Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.

Deciding Specification

The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.

Põhijooned

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Tehnilised andmed

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What speed does the DDR2 667MHz DIMM run at in practice?

The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.

What physical slot does this 240-pin DIMM require?

It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.

How do I install the dual-channel kit and what step is often missed?

Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.