Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green DDR2 DIMM modules with gold 240-pin connectors

A-Tech

A-Tech 2GB (2x1GB) DDR2 667MHz DIMM PC2-5300 UDIMM Non-ECC 1.8V CL5 240-Pin desktop RAM

SKU CH-HTWB-CBJ91

A 2 GB dual-channel DDR2 kit with two 1 GB DIMMs running at 667 MHz, 1.8 V, CL5 latency and 240-pin unbuffered non-ECC layout

  • Capacity2GB (2 x 1GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 2GB (2 x 1GB)

Speed DDR2 667 (PC2 5300)

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Kit Purpose

This A-Tech kit supplies two 1GB DDR2 modules for desktop systems that accept 240-pin unbuffered memory. The dual-channel pair targets owners of older AMD or Intel platforms needing a straightforward capacity increase.

Build And Connections

Each stick uses the standard 1.8V DDR2 voltage and a 240-pin DIMM edge connector that fits legacy desktop slots without adapters. Unbuffered non-ECC layout means the modules install like ordinary consumer RAM and require no special motherboard support.

Deciding Specification

The rated speed is DDR2 667MHz, also labelled PC2-5300, with a tested CAS latency of CL5. If your board specifies this exact frequency and voltage, the kit will operate at its advertised timing; otherwise the system will fall back to a lower supported speed.

Priekšrocības

  • 2GB dual-channel kit doubles memory bandwidth for smoother multitasking
  • DDR2 667 MHz speed accelerates application loading and system responsiveness
  • 8 V standard voltage reduces power draw and heat output
  • 240-pin DIMM form factor fits a wide range of desktop motherboards
  • Non-ECC unbuffered design ensures broad compatibility with consumer desktop PCs

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity2GB (2 x 1GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What speed does the DDR2 667MHz DIMM run at in practice?

The kit operates at 667 MHz, which is the PC2-5300 standard for DDR2 DIMM memory.

What physical slot does this 240-pin DIMM require?

It fits a standard 240-pin DDR2 DIMM socket on a desktop motherboard.

How do I install the dual-channel kit and what step is often missed?

Insert both 1GB modules into matching-colour slots for dual-channel mode; the step often missed is pressing each module down until the retention clips click on both sides.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.